20 Most Recent Frigidaire FFC1311DW - Page 5 Questions & Answers


Diane - Sorry I don't have a Frigidare but check out this site - I have heard of this but your error code could actually be 5b which is the best that they can do to show a Sabbath Day setting that the frig is designed with
Check and scroll down this website to get the description way down on the webpage:
https://removeandreplace.com/2015/08/12/frigidaire-refrigerator-error-codes/

Frigidaire... | Answered on Feb 27, 2019


Google is your friend. Use it. Find the parts manual and discern how to access the handle mounting.

Frigidaire... | Answered on Feb 24, 2019


Hi there, I am not sure what your asking. There are NO user serviceable parts inside the unit- and it sound like your temperature sensor failed or another part related to the sensor or thermostat- also the temperature controller could be damaged- is it out of control in the freezer and fridge? There is not much you can do beside call for help if you have already reset it. good luck

Frigidaire... | Answered on Feb 18, 2019


Possibly a fan not working or a defrost problem

Frigidaire... | Answered on Feb 11, 2019


Hi there, youved just inserted a wrong one and that wont fit inside, check the filter slot maybe you made some disallignment then put it again slowly..thanks

Frigidaire... | Answered on Feb 10, 2019


try by passing the thermostat if it goes replace it

Frigidaire... | Answered on Feb 02, 2019


Fridge keeps beeping: The following is for Frigidaire models but others can be addressed similarly.

Several Frigidaire refrigerator models have an electronic control panel on the freezer door the owner can use to adjust the internal temperature, dispense ice and water and receive notification about issues such as the need to replace a water filter. The refrigerators also emit a beep for various actions and as an occasional alarm. Determining what causes the beeps necessitates some troubleshooting.
Temperature Controls ·A Frigidaire refrigerator's display panel blinks when the control panel is touched to set temperature controls. After pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, press the arrow buttons within five seconds to increase or decrease the desired temperature. If you do not press the arrow buttons within five seconds after pressing "Freezer Temp" or "Refrigerator Temp" on the keypad, the refrigerator beeps to indicate the current setting will stay in place.

Door Open ·When you leave the refrigerator or freezer door open, the refrigerator beeps. Also, the "Door Ajar" indicator illuminates on the appliance's display panel. Shutting the door and pressing "Alarm Reset" stops the beeping and turns off the "Door Ajar" indicator light.
·The Frigidaire refrigerator has a control lock feature that prevents use of its control panel or dispensers when the unit is locked. When the control lock is active, a beep sounds when a keypad or dispenser is pressed. Release the control lock by pressing the "Control Lock" icon for three seconds. A beep will sound, and the icon's light will go out.
Power Reset ·A power reset is occasionally necessary if the Frigidaire refrigerator's control panel does not work normally or a reset function on the keypad does not work. A power reset involves disconnecting power to the refrigerator by unplugging its power cord from the electrical outlet, waiting 30 seconds and plugging the power cord back into the electrical outlet. When the control panel resets, a beep sounds. If the refrigerator beeps even after a power reset and the beeps' source is not known, contact Frigidaire.


Read more :http://www.ehow.com/info_12148688_cause-beeping-noise-frigidaire-refrigerator.html

24782556-hq4k3xnttsgicnyjnrabh2eb-4-0.jpg

24782556-hq4k3xnttsgicnyjnrabh2eb-4-2.jpg

24782556-hq4k3xnttsgicnyjnrabh2eb-4-5.jpg

24782556-hq4k3xnttsgicnyjnrabh2eb-4-9.jpg

24782556-hq4k3xnttsgicnyjnrabh2eb-4-14.jpg

24782556-hq4k3xnttsgicnyjnrabh2eb-4-20.jpg

Frigidaire... | Answered on Jan 26, 2019


Look on the spec label that shows voltage, amps, model number and serial number. This is often at the rear near the mains wire or on a label inside the fridge.

Frigidaire... | Answered on Jan 15, 2019


Replace the hose that’s leaking

Frigidaire... | Answered on Jan 14, 2019


Good Afternoon Gerald, thank you for your post!
I see that your Frigidaire refrigerator is only dispensing crushed ice not cubed ice. Your solenoid (which tells the dispenser crushed or cubed) might be frozen. You can defrost the solenoid by disabling power from it for at least one hour and then restoring power. If you continue to experience this issue you may need to have the solenoid replaced or the control panel and I would suggest having a professional technician out for proper repairs. Good luck with your refrigerator! -Matt

Frigidaire... | Answered on Jan 13, 2019


The bucket is probably frozen in it mount. Turn off refrigerator until it defrost enough to release it

Frigidaire... | Answered on Jan 12, 2019

Not finding what you are looking for?
Refrigerators Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Frigidaire Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Refrigerators

  • Frigidaire Refrigerators

Most Popular Question

2016 frigidaire profile located in

  • Refrigerators
Loading...