20 Most Recent Kyocera K10 Royale Cellular Phone Questions & Answers

from the website:

How do I set speed dial for one of my contacts? First, find the contact in your Contact List, highlight it, and press OK. Then select Options -> Speed Dialing and press OK.

Choose one of the numbers from the list and select Assign to assign it to your contact. You can now use 1-Touch Dialing for that phone number. Just press and hold that assigned one or two digit number instead of dialing the contact's entire phone number.

I appreciate your help - Fixya has assisted me before on another problem. Re phone, found the old manual and resolved problem. thank you

first, take out the battery and press the RED end call key for 15 seconds, then put the battery back in and turn on the phone.

if that doesn't work then try this from the website.

"
How do I lock/unlock the phone's keypad? To lock and unlock your phone's keypad, press and hold the left navigation key.
Or, select Menu -> Settings -> Keyguard. Then highlight either of the options and press the OK button. You can set your phone to lock the keypad immediately, or automatically if no key is pressed after 30 seconds, 1 minute, or 5 minutes.

To unlock the keypad: Press 1-2-3 in that order."

good luck!

Kyocera K10 Chronic Problem. It Shuts Off Unintentionally, Automatically.

There is an inherent problem in the K10 cell phone and VirginMobile knows it. They will automatically shut off several times a day at random intervals.

They will send a 'refurbished' replacement free of charge. Most of these are phones customers sent back for the same problem. They give it a quick test and then send it along as a replacement to the next customer.

After the third ( that's right, count 'em, THREE) replacement phones, they finally sent me an Kyocera Oyster phone as a replacement.

I had my original phone 2 years before the problem began. I read somewhere that it is a virus afflicting the K10. Virgin Mobile will not officially acknowledge th problem but their some of thier customer service reps will. Have this problem? Contact VM.

[email protected]

All I can suggest for this is to take it to mobile phone specialist. They will have the tools to help. There is a possibility they will have to do a 'Hard' reset which often mean resetting to phone to factory settings. This means you risk losing your personal information like phone numbers, Photos and stuff you've saved on the phone. Pin codes are a security feature so naturally are hard to bypass.

Kyocera DuraXV LTE - Activate / Set Up Device
Select a language option then select. Set. ...
On the Full Readout screen, select an option then select. Set. ...
On the "Phone activation" screen, Verify the 10-digit mobile phone number then press the. ...
On the "Verizon Cloud" screen, press the. ...
On the "Ready to go" screeen, select.

The Kyocera E4810 is also known as the Kyocera DuraForce Pro 2 and it is compatible with a variety of carriers in the United States, including:

• Verizon
• AT&T
• T-Mobile
• Sprint
• U.S. Cellular

However, it's important to note that some carrier-specific features may not work if you're using the phone with a carrier it was not originally designed for. Regarding the issues you're experiencing with Tracfone, it's possible that the phone may not be compatible with their network or there may be a configuration issue. You may want to contact Tracfone customer support or visit a Tracfone retail store to see if they can assist you with getting the phone to work on their network

APN & data settings

1. From any Home screen, tap Apps.
2. Tap Settings > More > Cellular networks.
3. Tap Access Point Names.
4. If available, tap the T-Mobile US APN.
   • If not available, tap the New APN icon.
   • To reset your APN settings, tap the Menu icon with three dots, then tap Reset to default.
5. Verify and update the following settings for the Data APN:
   • Name: T-Mobile US
   • APN: fast.t-mobile.com
   • Proxy: <Not set>
   • Port: <Not set>
   • Username: <Not set>
   • Password: <Not set>
   • Server: <Not set>
   • MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
   • MMS proxy: <Not set>
   • MMS port: <Not set>
   • MMS protocol: WAP 2.0
   • MCC: 310
   • MNC: 260
   • Authentication type: <Not set>
   • APN type: default,supl,mms
   • APN protocol: IPv6
   • APN roaming protocol: IPv4
   • Enable/disable APN: <greyed out unless there are multiple APN's>
   • Bearer: Unspecified
   • MVNO type: None
   • MVNO value: <Not set>
6. Tap the Menu icon with three dots, then tap Save.
7. Tap the desired APN profile you want to use. The bullet point fills with color next to the APN profile.

Manual network selection

The device detects and registers on wireless networks inside T-Mobile's calling area, but roaming networks are usually restricted to T-Mobile SIM cards. You can manually select a network only in areas where T-Mobile does not own GSM spectrum.

1. From any Home screen, tap Apps.
2. Tap Settings > More > Cellular networks.
3. Tap Network operators.
4. Wait while the device populates a list of available networks.
5. Tap the desired network you wish to register on.

Switch 2G / 4G

1. From any Home screen, tap Apps.
2. Tap Settings > More > Cellular networks.
3. Tap Preferred network types.
4. Choose from the following options:
   • LTE/WCDMA/GSM (Auto mode)
   • WCDMA/GSM
   • GSM only

Turn on / off airplane mode

Airplane mode turns off wireless connections. This allows app and menu use, but prevents voice or Internet use.

1. From any screen, swipe down from the top of the screen.
2. Tap the down icon (v), the tap Airplane to turn on or off.

Turn on / off data roaming

1. From any Home screen, tap Apps.
2. Tap Settings > More > Cellular networks.
3. Tap to turn Data Roaming on or off.

Turn on / off mobile data

1. From any Home screen, tap Apps > Settings > Data usage.
2. Tap to turn Cellular data on or off.

From - https://support.t-mobile.com/docs/DOC-28547 If you need further help, I’m available over the phone at https://www.6ya.com/expert/daniel_a4640839dbb7ec58

Question edited for clarity Duroforce . DurAforce. Question moved from Cara and Trucks. It appears to be a know issue. https://www.google.com/search?q=Kyocera+Duraforce+phone+overheat ..

This happened with facebook on my android. First try resetting your phone (turn completely off then back on). If that does not work go to settings and completely uninstall Instagram. Go to play center and re download it.

try this. Good luck. http://www.android-recovery-transfer.com/iphone-data-recovery.html

Question edited to add FULL make and model name. Remove Block

1. From the main screen, select Menu. Use the 5-way navigation pad to highlight and the center button to select.
2. Navigate: Tools and Settings > Settings > Call Settings > Call rejection.
3. Highlight the contact(s) to remove then press the left soft key to choose Remove.
4. To confirm, press the left soft key to choose Yes. https://www.verizon.com/support/knowledge-base-214517/ ..