20 Most Recent
Kyocera FS-4000DN Laser Printer - Page 2 Questions & Answers
I HAVE A KYOCERA FS-4000DN PRINTER THAT SHOWS ON
Call the Kyocera hotline they have technicians you can speak with over the phone who can help you.
You may contact Kyocera Technical Support Monday - Friday 9 am - 6 pm EST at:
1-800-255-6482
5/19/2014 1:44:14 PM •
Kyocera...
•
Answered
on May 19, 2014
Error f0500000000
C0150
Engine PWB EEPROM Backup Memory Device Problem. EEPROM cannot be written or read.
C0150
This is what Kyocera says the problem is.
4/30/2014 11:58:16 AM •
Kyocera...
•
Answered
on Apr 30, 2014
Call Service 7410:0317105
This code indicates that the drum unit is not correctly loaded into the printer. Open the door on the side (where the waste toner container fits) and ensure that you gently push the drum unit into the machine.
Your handbook will show you the drum unit.
1/20/2014 2:31:14 AM •
Kyocera...
•
Answered
on Jan 20, 2014
Call service 7000: 0370082
Toner motor lock error**The top cover interlock switch is damaged and the top cover actuator side does not always seat properly. Replace switch (part of switch regulator pcb) and repair retaining clip
12/26/2013 7:27:14 PM •
Kyocera...
•
Answered
on Dec 26, 2013
What is error code 2200 on Kyrocera fs-4000dn
The drum unit is jammed. The waste toner gear is jammed from waste toner hardening. Best solution replace drum unit other wise you will have to pull up the unit and clean unit thouroughly.
Usually this problem occurs if unit is used over 300,000 prints.
6/10/2013 6:33:39 AM •
Kyocera...
•
Answered
on Jun 10, 2013
I have the 7410:0043689 error
This error 7410 is a Drum unit non- installing error. The drum unit is not installed or not installed properly.The drum PWB EEPROM does not communicate normal. Detaching and refitting the drum unit;Procedure Remove the developer unit Procedure 1. Open the top cover.2. Open the MP tray.3. Remove the developer unit.4. Check or replace the developer unit and refit all the removed parts.5. Open the left side cover and then remove the waste toner box.6. Unlock the drum unit lock and then remove the drum unit.7. Check or replace the drum unit and refit all the removed parts.Good Luck
6/10/2013 6:07:08 AM •
Kyocera...
•
Answered
on Jun 10, 2013
Not finding what you are looking for?