20 Most Recent Kyocera FS-4000DN Laser Printer - Page 7 Questions & Answers

check if auto rotation is on or off

open the back of the machine two screws hold it in

look for the trigger that hits the switch to tell the machine it is close usally i thin long piece of plastic

You can connect the printer with a parallel cable, open cmd and type echo !R! FPLC 0; EXIT;>lpt1.

This is a machine serialnumber mismatch between to EEprom's

Fax board problem

could be a number of things but could be the dv unit.

Upgrade your firmware on the machine (a tech will need to do that) and download the latest KX driver from kyocera support

As an error, the C-4200, refers to laser unit. Sometimes the main charge (mc) cause this error. Remove the mc and check the sound of the laser. If you don' t hear the laser sound, then the problem is the laser unit

go into service mode and print out the maintenance sheet and look for the ucode for factory reset

I don't recommend cleaning a waste toner bottle but if you do just pull it out and empty the toner out its very messy for don't wear anything you don't want to get dirty

fax your cell phone the number that calls up is the fax number

it could be the drums are bad print the color test pages and see what the colors look like if there bad replace the drums for the colors that are bad

The Date/Time settings in FS-3640MFP is in the system menu. Press the system menu/counter key, find (inside the menu) the System and then the Date/Time and change whatever you want. The login usernane and login password is 4000.

This service code means that the waste toner reservoir inside the drum unit is full and that the printer has printed over 100.000 pages.

Unfortunately, you cannot reset the page counter on any kyocera printer. Unless you have an eeprom reader with the appropriate software.