Kodak EasyShare M853 Digital Camera - Answered Questions & Fixed issues

Question translated into written English, add CAPS, fix typos and remove text speak abbreviations. Question moved to Model Category. Try this reset fix.

I have a Kodak Easy Share C513. The flash doesn't work

JustAnswer https://www.justanswer.com > Camera Problems Dec 28, 2012 - 1. Remove the battery and memory card from the camera. ... for approximately 20 minutes. 3. Reinstall the battery and power on the camera and let ... 1 answer · Top answer: It is not minor problem.If it is not under warranty then please don't send it to service ... Missing: m853 ‎' Show results with: m853

I have a kodak easyshare m753 the flash wont work

Fixya https://www.fixya.com > support > t3124129-kodak_e... Jul 15, 2009 - Remove your battery and memory card for 15 min and put them again. (you can also try by putting new batteries. In some cases battery can be ... Or camera repair near you. https://www.google.com/search?q=kodak+digital+camera+repair+near+me .

Hello Bonita, It sounds as if the .mov file has been corrupted, I would try to format the memory card and try it again to see what happens.Hope this helps.Best Regards, Russell

Hello! Please check the "Troubleshooting" part of the manual. https://manualsbrain.com/en/manuals/1041783/?page=51 I hope it will help!

This camera is nine years old. It is worn out. Replace it.

ATTENTION:::
TO EVERYONE WHO POSTED THE COMMENTS ABOUT HOW TO FIX THIS PROBLEM I WANNA SAY THANKS. ALL I HAD TO DO WAS POP THE LENS OUT MYSELF AND THE CAMERA IMMEDIATELY WENT BACK TO NORMAL. AND NO THIS ISNT A PROBLEM WITH THESE MODELS....ITS JUS THAT WHEN THE CAMERA'S BATTERY DIES IT AUTOMATICALLY TURNS OFF AND IF U LET YOUR BATTERY GET REALLY LOW IT DOESNT HAVE ENOUGH ENERGY TO FULLY RETRACT THE LENS....WHICH IN RETURNS CAUSES THE LENS TO GET STUCK..
IN THE FUTURE JUS TURN YOUR CAMERA OFF AS SOON AS THE BATTERY LIGHT BLINKS

go around the black ,shut of the car if the car don't star the battery is not fully charge but if u have a tester u got it bro

I have had the same problem. Can be of two things. 1) Issue with the charging circuit. When you plug your charger on it should indicate a yellow light. If not, either your charger is not working or your charging circuit is not working. Go to the store and get them checked. 2) Issue with the battery contacts. Simply take out the battery and get a cotton bud and clean the battery contact both on the battery and inside the battery compartment. 3)Issue with the charging circuit and the internal circuitry. You will have to take it to the KoDAK store. I would recommend buying a new one.

The best way to transfer pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa ( http://picasa.google.com ).

Normally you don't over charge a battery, when it is charged for some extra hours. The electronics should stop the current. And when your computer is still working it should not have killed your camera. But be aware that as long as the camera is attached to a computer or a charger you can't switch it on. Depending on how old your battery is and how it is used in the past, the battery could be gone. But it is not only to blame on the last charge cycle. Try measuring the voltage of the battery with a multi meter. The voltage should be a few tenths of a vat above the voltage printed in the battery. I think your battery will be like 3,7 volt, and when charged the multi meter should read 4 volt. Anything below 3,7 volt means the battery is dead. (at least not fit for your camera) It is better and safer to charge the battery on an external charger in the future.

What sort of media? SD card? There are many undelete utilities and services out there. Pick a reputable source like cnet.
e.g. http://download.cnet.com/Undelete-SD-card/3000-2242_4-201454.html
Install software and card and run the undelete software.

sometimes the charger can become loose in either the camera or the plug so try buying a new plug and if it still doesn't work then it is a problem with the camera and you will have to ask the people you bought it from

is the light that's coming on green or red?
if it's red, there's a charging error - contact kodak, they may provide a 5v ac adapter to resolve your charging issue

if it's green, was it blinking or solid? is the battery drained?
if the battery still has a little charge on it, please connect it to the computer then turn it on, check if there's power light
check if the screen is black - that means it's making a connection and the charging is the only issue - computer not detecting it, maybe resolved by kodak's software support

if the camera screen is active - that means there's definitely something wrong with the camera

arrange repairs with kodak, include the battery and usb cable
please visit
www.kodak.com/go/itg - troubleshooting and repair
www.kodak.com/go/usbcharging

main board problem or related signal error.

The repairs will cost more than a new camera !!

Send it in for service with the rest of these models, lots of problems.

The unit has been ruined, These contain very sensitive electronic components that can not have the wrong voltage applied to them. The cost to repair this camera will far exceed the price of a brand new one.

The camera is a wonderful Kodak product and takes beautiful 8.5 Megapixel photographs. When you save the pictures to an SD card, you must at some point remove them digitally from the card.
Either by linking it to the USB cable and going from there to your PC, OR by removing the SD card from the camera and inserting it into an SD card slot in your computer, printer, or card reader. Occasionally the card readers such as the ones in your PC, printer, or card reader devices do not connect properly and will only transfer part of the data, resulting in pink ugly lined photographs. This problem can be fixed by using the USB cable instead of the built in card readers in your other devices.

Try these procedures.

.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Try these procedures.