Uniden DECT 6.0 Cordless Phone ID - Answered Questions & Fixed issues
Uniden dect 6.0 blank screen problem , the screen
I'm having the same problem as you are. My screen went blank for no apparent reason. I've been searching for a quick fix solution but I keep comming across asinine answers that has nothing to do with the original problem such as this one. If you find a solution before I do, can you please post it? Thanks in advance!
How do I get my uniden dect 6.0 off of silent mode?
This works for the Uniden D1660 and similar dect 6.0 models:
On the lower right corner of the keypad, press the # [silent] key.
One press put it into 'silent mode', another press takes it out.
Good luck!
How to you set number of rings for Uniden 6.0
To set the no. of rings for a Uniden D1680 or similar, try this:
1. Press [menu]
2. Scroll down to 'Answ Setup', press [select] or [ok]
3. Scroll down to 'Ring Time', press [select] or [ok]
4. Scroll down to highlight your choice, '2 Rings', '4 Rings', etc.
press [select] or [ok]
5. Press [back] or [off]
=====================
Good luck!
How to lessen number rings before going to voice message
To set the Answer Machine System's Number of Rings,
model D1680 or similar:
1. press [MENU]
2. scroll to "Ans. Setup" then press [select]
3. scroll to "Ans. Setup / Ring Time" then press [select]
4. scroll through the choices, at desired one press [select]
5. (chirp) press [END] to conclude & exit
Good luck!
--------------
Uniden cordless 6.0 answering machine , reset code on security code answering machine?
To reset the Security Code for remote access into the
answering machine system ( model D1680 & similar )
1 press [menu]
2. scroll to "Ans. Setup" press [select]
3. scroll to "Ans. Setup / Security Code" press [select]
4. first digit will be blinking, enter two digits of your choice
5. press [select]
6. press [END] to conclude & exit
Good luck!
-------------
Blinking light stays on after msgs have been deleted
That might be the Voice Mail Waiting Indicator which
is NOT part of the answering machine system.
On the D1680, D1481, and similar handsets,
it is reset (turned off) by:
1. press [menu]
2. scroll down to "Global Setup", press [select]
3. scroll down to "VMWI Reset", press [select]
4. scroll down from "No" to "Yes", press [select]
5. handset will chirp, blinking lamp goes out,
6. press [END]
Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at
www.manualslib.com to get a free
copy of the User's Manual.
Good luck!
How do I turn off voicemail light?
To reset the Voice Mail Warning Indicator ---
(( On the D1680 and similar handsets ))
1. press [menu]
2. scroll down to "Global Setup", press [select]
3. scroll down to "VMWI Reset", press [select]
4. scroll down from "No" to "Yes", press [select]
5. handset will chirp, blinking lamp goes out,
6. press [END]
Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at
www.manualslib.com to get a free
copy of the User's Manual.
Good luck!
Manual?I lost mine
To obtain a replacement manual, you'll need the precise model
number of your phone: this is found on a small sticker
underneath the battery inside the handset. Take this
model number (eg, D1680) to
www.manualslib.com
and you can download a free copy of the manual.
Good luck!
How do I change silent from on to off so phone rings when I get a call?
On the D1680, D1481, and similar phones,
the three levels of ringer loudness plus
"off " are set at the base using the same
[ - ] Volume [ + ] buttons used to adjust
the answering machine message volume.
Pushing the [ + ] and [ - ] keys will
set the ringer to be louder or softer. A
number in the "message counter display"
will report the relative loudness...pushing
[ - ] below level-1 loudness will show
"0" loudness and an announcement of
"Ringer off" will be spoken. From here,
a single push of [ + ] will turn the ringer
on to level-1 and play a ~10 second
sample of the ringer at that volume:
while it is playing the sample ring,
subsequent pushes of [ + ] or [ - ]
will toggle the loudness levels of
( off, 1, 2, 3 ).
Good luck!
How can I delete 25 missed calls?
on the base station and not from hand sets
there is a delete button that looks like a trash can
the instruction in the owners manual is this :-
while playing a message press the trash can ( delete button for each message or
with the system in standby mode ( no one using the phone ) press the delete button ( trash can to delete all at once )
I can hear the person on the other end when i make or receive a call but they can't hear me
uniden australia service division phone number --1300-366-895
uniden new zealand service division phone number---(09)-2738377
e-mail is
[email protected] for australia or .co.nz for new zealand if the phone numkber is not operational try an e-mail as that is their prefered method of contact
basically you need the number of a local service agent that can advise you or fix the fault If the phone is still under warranty take it back to the retailer and get a new unit under warranty as the problem may be in the microphone in the hand piece
I REQUIRE A OWNERS MANUAL
www.phonak.com/.../
dect/_.../
User_
Guide_
DECT_
Phone_029-0...
PhonakThe cordless phone DECT CP1 is a quality product ... Please read this user guidethoroughly in order to be ... Of course, you can also use the phone without a.
www.brandsmartusa.com/pdfs/
manuals/20146396.pdf
... of this user's manual. Please thoroughly read the user's manual for all the feature operations and ... Type: DECT 6.0 cordless telephone with answering system.
The Base says new cid:34. How do I get it back where it was. I tried to get a number that rang and it changed the settings
Julie,
Sounds like 34 is the # of calls that came in on the caller ID (CID) lis
To open the Caller ID list, press the little phone handset symbol (it looks like a big "C" then ID next to it) on the right side of the 4-way button (it toggles 4 ways, so press to the right side to get the Caller ID list).
The phone will show the number of new calls (or Caller ID records) and the total number of stored CID records. Use the "up" arrow and "down" arrow to scroll through the list.
It looks like you have the Uniden DECT 6.0 6035, so I attached the manual in case it helps.
You can set up the answering machine if the voicemail was deactivated by Lifeline (page 38 in manual shows how to set up answering machine). If 4 rings is not enough, you can change the # of rings (page 40) and to use the answering machine/voicemail, see page 42 in manual.
Uniden 6035 1 Owner Manual
Not finding what you are looking for?