Top 20
Sony BRAVIA KDL-40V3000 Television - Page 7 Questions & Answers
Green pixel lines
It sounds like a bad LCD panel but you would have to post a picture of the problem for me to be sure
9/11/2008 12:26:58 AM •
Sony BRAVIA...
•
1,252 views • 1 helpful votes
Can't get audio via optical port.
ok, i think the problem lies with the tv, there must be a setting in the sound menu to use optical as sound out, as the sound will be via the HDMI cable, i applogise if you have checked this.
Picture cut
Sounds like a bad panel, although the audio problem is puzzling. When you say "cut off" is half the picture missing? A better description would help
SONY BRAVIA 50IN KDF E50A12U
i have the same problem on mine, my tv is only just 12 months old, in the last 4 weeks it had 2 new blocks put in as the tv was blue, it costing £700 each (under guarante for 3 years thank god) then lastnight the tv made a big bang then switched it self off and the sand by botton is now flashing red then green, i have to leave it 30 mins before i switch it on again then only last 10 mins before it does the same thing again, got sony coming out again to day to fix it, had it with this tv now hate it !!!!!
Sony KDL-40V3000
Sorry to hear this, It looks like you have a bad panel, more specifically a bad t-con board but this board is supplied as part of the panel. The panel for you tv costs over $1000, If I were in your shoes I would call sony and complain, they have been knowen to assist you in some way IE pay for the part and you pay labor or sometimes they take care of the job in full. They are going to want an estimate from an authorized service center in your area. You may want to have one come out and write you up an est and then call sony and complain. Let me know if you need more info.
Thanks
Tim
I cannot get sound out of the TV
Sounds like you have the variable audio out of your tv going to stereo, and variable audio means when you turned the sound down the sound off and then you have no audio. go through tv audio menu, you have fixed out, variable out, also speaker on and off, these need to be set for your application.
Connection help with receiver and lcd TV
depend on what you wants to do. if you wan to get sound from your tv on receiver connect out from tv to in on receiver if U have optical out from tv send this to optical input on your receiver and set up your receiver to impute to digital HDMI carrie sound and video...
(My Denon receiver set-up shows an HDMI cable going from the Video Out on the TV to the HDMI MONITOR OUT on the receiver)
OUT TO OUT don't make sense ...could be out to impute you may have HDMI going from receiver to TV and other HDMI imputs on receiver to use receiver as distribution unit say you have satellite HDMI, DVD HDMI, Computers HDMI IMPUTE all of this connected to your Receiver and the HDMI monitor out from your receiver connected to TV so now you may select any of this sources to wach In your TV and lessen trough receiver speakers
Connection
The monitor outputs on most Sony TV's are regulated by the volume level. In other words if the volume is set low then the output will be low. Go into the menu of the TV and turn the internal speakers off and then see if there is an option to set the audio output to FIXED or VARIABLE. Set it to fixed and all should be good to go.
Panel button
Did the panel buttons ever work?
if not mabey it was never connected inside the tv from factory
Tv bracket
sorry, but i'm an electronic technician. I don't know enough information about strapping a tv to any type of stand. I wouldn't trust it.
c-dog
Not finding what you are looking for?