20 Most Recent
Sony BRAVIA KDL-46W3000 Television - Page 2 Questions & Answers
Television picture
HelloThe T'Con board {Timing Control Board] has damaged. It should be repalced.
I HAVE A SONY BRAVIA LCD BAD PICTURE WITH COLD START
I just repaired my Sony with this problem by adding shims under the LED driver board. This board sits over top of the T-CON board and spans the length of the screen. Several conductive pads on the board make a connection between this circuit and the metal frame that runs across the top of it. By adding a slight pressure under the circuit board where the pad resides, it created a better connection and resolved the problem.
Goes into standby when turned on
You most likely have a ccfl in the backlight that has burnt out. It's a long, thin fragile light behind the screen. I had a 40in sony lcd that I fixed this way.
Sony kdl46w3000 repairs
HelloCheck its mother board for any solder loose or refulator IC failure. You must have through knoledge in electronics to follow up. If you have, inform me. This is the pircture of the motherbard to your tV. To do any sork to this board, you must have knoledge to follow its schematic diagram, It is a skilled work indeed.
We purchased a Sony KDL-46W3000
Hi I have an old school solution for your problem with your tv. Hit it!!!!! When you turn on your tv, go to it and lightly tap on the middle of the left frame. You should see it affect your screen. Do it until your screen is perfect. Hope it works.
Thin green line is it
thanx smart home just had the green line prob your fix worked like a charm. any tips on a crisper pic ive always found that unless the source is 1080p perfect the picture is a little blurry. its almost like there is no image processing. man i mis my hitatchi.
2in black line across top
I hope out talented expert would have been provided you helpful info in chat, if you need further help, let me know.
Thanks.
On HD full mode
Check the aspect ratio on the TV, if there are black bars on the sides, the program you are watching is in 4:3 (Square) on a widescreen (Rectangular) tv and are meant to be there.
Tv goes blank standby light
6 blinks means abnormal speaker voltage. Hook up external speakers and see if the set comes on. Let me know how it goes.
Sai.
How do I remove the
Menu mode to "Settings" toggle to "Banner" setting is "off" it will still display the input at first power up for 15 sec or so, then off. If you still have a problem with this, post a comment and I will help you further
I moved from Japan to Texas and my Sony 46w3000
This is called a bad solder lead or cold solder joint when they started to use lead free solder in factories these issues started to bloom not just in your TV but others too. You might want to consider taking it to a shop locally to have the situation repaired I amsure if it is something that needs t rework it will not cost much say about $50 at the most.
Thanks and please do leave postive feedback and ratings. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Not finding what you are looking for?