20 Most Recent ViewSonic VX2835wm Monitor - Page 6 Questions & Answers

Go to the OSD controls and locate the memory reset and execute that function. Post again for more details about your issues with this unit or call ViewSonic technical support for assistance.

Check the settings for audio volume control on the monitor side. Also, check the individual settings for the audio for applications and system sounds on the OS side. Or call ViewSonic technical support for assistance.

Check the settings of the monitor for audio volume. Also check the individual volume control setting for the applications and system sounds. Or call ViewSonic technical support for assistance.

VA2448m-LED monitor. Ensure your cables are connected securely and the input source is correctly selected. Then make sure you are sending a valid timing resolution mode to the monitor. If this fails, please call ViewSonic technical support to help resolve your issue.

Make sure the MAC is sending a valid timing mode that conforms to industry timing standards or VESA standards.

Have you first tried another monitor to ensure that your computer is sending a signal to the monitor.

How to remove back cover of ViewSonic G71F+. First remove the 3 screws at the bottom , one on each side and one above the VGA cable. Now look for three small slots on the top of the monitor near the screen. From the side opposite the screen insert 2 medium-small flat blade screwdrivers into the center slot and the slot on one side at an angle of about 25 degrees from the top plane of the monitor then gently pry up by pushing the screwdriver handles toward the top plane of the monitor. Once the plastic latch in the center and one side are released move the screwdriver on the side to the opposite side to release that side.

is there any problem with the monitor?
yello is what?

Search Viewsonic.com. The Windows generic driver usually works. If you have a special video driver for your Samsung, it may be interfering. Multiple monitors have to be set up through your display driver. The viewsonic should be available through the device manager.

well if you don't see a lot , your backlight is dead:), easy to repair since you propably get 3 screens which fit when you search for it and every screen is just an oem.... :). except the special expensive once. Take notice if your screen connection is left or right sided and besides get it removed and placed is by unscrew some screw and then comes the uncliccing parts; Use some a sharp screwdriving(with some tape on it to avoid get ugly points). It's just clickwork, don't be afraid to ruse some strength. good luck

if you r using WIN 7.then on desktop right click on blank area and choose screen resolution. now select recommended resolution from the select.

LCD panel is bad. Recommend buying a new unit.

Please clarify what type of pop noise. Audio pop or just a pop noise and the unit may no longer be working?

Check your computer to make sure it is actually sending out a signal. You can do this by hooking up another working monitor. If the other monitor works, there maybe a problem with the original monitor and it may need to be sent for service repair.

Usually ViewSonic products have a default memory as part of the OSD or menu system. Enter the menu by pressing the "1" button, then scroll down to find the default setting and execute it. If this doesn't resolve your issue, I recommend you call ViewSonic Customer Care for support.