20 Most Recent Symbol LS9208 Hands Free Barcode Scanner Questions & Answers

Hi Contact Motorola Solutions Get Support or Zebra Technologies Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly. Mark Motorola Mobility Support

i'm starting a new material supplied business so we need a free logo

If the scanner is connected through USB connection, the barcode should appear in the Notepad. If you use the Serial connection RS232, the Barcode data are showed than in Hyperterminal or other application, which is interpreting data from Serial Port.
Please scan the barcode from Product Guide according to your connection. And check the scanned data in an application - Notepad for Keyboard Wedge or USB, Hyperterminal for RS232.

sell lit DARE KURK !! YO UM SAYEN RYTE !!

1. Press and hold the trigger for an extended period of time (approximately 5 seconds). The scanner cycles through three settings (Low, Medium, High) emitting a 2-beep tone at each setting.
2. To select a particular setting, release the trigger after you hear the desired 2-beep tone.

If you need to have a carriage return/enter after each bar code scanned, scan the following bar codes (from the Product Reference Guide) in order:
1. <SCAN OPTIONS> (on page 12-9) 2. <DATA> <SUFFIX> (on page 12-10) 3. Enter (on page 12-11)

The barcode is located in the manual at http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=6083307apdf&sliceId=&dialogID=27078141&stateId=0%200%2027076163 at the page 45 , the name is "Set Factory Defaults"

You'll never be able to make the appropriate cables - and Motorola (they bought Symbol) no longer publishes schematics for cables. Contact the Motorola helpdesk at 1-800-653-5350

I can provide with all questions you might have regarding this scanner. You can always contact me by phone or email 630-622-2024 [email protected] Please visit our website www.legacyglobal.com

is it a ps2 connection or usb?
there are instructions here http://www.fluidlife.com/media/pdfs/prod_ls9208_quick_start_guide.pdf