20 Most Recent Sansui 19 in. LCD TV - Page 4 Questions & Answers

Try to auto scan your TV using menu..This is to search the available channel on your location..

The program is locked by other means. Please go to menu and select child lock or such other protection, and enter password if previously enabled and open the lock.

Your TV need a through check up. The main board should be troubleshooted. Contact any experienced service technician. If you are handy in electronics, visit this site.

Check this site for more details. "Electro-help" is the site name. Search it by google search. You can locate it, either at the bottom of the first search page, or at the top of the second. It is an electronics equipments repair help site in English.

consult the owner manual of your set.

Ifr you can have a clear reception on your TV set the problem could be on the main amplifier section it could be a defective capacitors bulging and leaking caps.this can also because of a defective capacitor on the power supply board checke for any bulge capacitors and replace it..

Fixya used to have paying questions but no longer does that--this is a really free site--ask and it does not cost anything.

I see so many here with no sound/nopicture issues:ISSUES: 1. IF sound main fuse/s are good.2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.3. almost all these sets the troubleshooting involves checking voltages on the main power board to narrow down theproblem.4. Be safe and if you do not know what you are doing don't open the set.Answers to issues:1. RE:fuses---if a blown fuse is found get a good replacement(not the genericones like Radio Shack). Many fuses are special even aside from amperage--Don'tput a higher rated amperage fuse in the set for any reason.2. RE: power supply in set: if total dead aside from main fuse the set uses astandby power supply that runs 7/24 and a main supply (some are combined andsome not.Here aside from checking fuses you want to examine all the filter caps on thepower/standby to see if any are puffed up or buldged up in some fashion--Iattach a photo of a good one---top should be silver metal and PERFECTLY flatand have no brown material coming out on top or bottom.What happens in the standby area is they use caps with too low a voltage rating(saves money) which causes them to fail in a year or two---the standby runs7/24 and the heat dries out the caps and they fail.3. Trouble shooting consists of the above and then at some point you have tobuy and try a board to see if it fixes it or not.4. Safety first--no TV set is worth getting injured or even killed over.Look at the power supply (follow the power cord) for bad caps that are puffed up like these are on top.

Hi thereCould the reason be that there is something wrong with the broadcasting on this one channel?Kolbrun

Try going into picture setting and reduce the zoom angle or if it's whilst you are watching Sky TV go into System Settings, Picture Settings and change the Aspect Ratio (ie. From 4:3 to 16:9 or visa versa)Gadget

Do you have it set up to scan the channels in cable tv mode?

That is a service port not a flash drive reader

The port in the back is a service port not a Flash card input.

If possible eaily take it straight back to the shop it came from or whatever advice the instruction book tells you depending on where in the world you are.

Try Sansui website itself,if ur tv model is still in the market.U will be able to down load it for free and print it.If not look for their phone number 1-800... call their customer service pay them a fee.They'll send it out to u.

Here is a link to a User's Manual for one model of 19 inch Sansui LCD TV (HDLCD1900):

http://www.sansuiproducts.com/images/manuals/HDLCD1900.pdf


To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.

See page 18 of the manual for detailed instructions and illustrations on how to select the TUNING BAND OPTIONS from the main menu.

Basically, you press the MENU button on the remote.
Then select SETUP.
Then select TUNING BAND.
In the TUNING BAND OPTIONS select CABLE.
Then press MENU again to exit.

Obviously you also want to make sure that the cable is properly attached at the back of the set and did not simply get accidentally pulled out or disconnected.

I hope that was helpful to you, good luck and take care.

If you choose to rate this solution by clicking on the YES THIS WAS HELPFUL icon, I thank you very much for your time and consideration.

Joe.