Top 20 Dynex DX-LCD37 TV Questions & Answers


What is the problem you faces with this set? If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

Dynex DX-LCD37... | 135 views | 0 helpful votes


Check and replace its tuner. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

Dynex DX-LCD37... | 122 views | 0 helpful votes


The sound PCB is not separate it is part of a larger board. I do not suggest the cost as it may not fix the problem. Just replace the TV.

Dynex DX-LCD37... | 75 views | 0 helpful votes


Just try a reset to this set, and check. If it do not help you, the main system control memory IC is faulty. Check and replace it. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Dynex DX-LCD37... | 955 views | 0 helpful votes


Search Results

    [PDF]DX-LCD37-09-2 - Dynex Products

    www.dynexproducts.com/.../DX-LCD37-09-2_08-1430_ENGLISH_WE...
    Jan 15, 2008 - DX-LCD37-09-2 ... Connecting an antenna, cable TV, or satellite TV box . ..... Remember that children can become excited while .... Do not drop your TV or hitthe glass screen. If the screen breaks, be careful of broken glass.Missing: ball

    [PDF]DX-32L200A12 DX-37L200A12 DX-46L262A12 - Dynex

    www.dynexproducts.com/.../DX-32L200-37L200-46L262A12_11-1082...
    DX-46L262A12. USER GUIDE. DX-32L-37L-46L_11-1082_MAN_V2_EN.book Page 0 Tuesday, November 22, 2011 1:09 PM .... Using the on-screen menus . ..... CHILDSAFETY ... TV or hit, jolt, or press hard against the LCD panel. If.Missing: lcd37 ‎ball

Dynex DX-LCD37... | 91 views | 0 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

Dynex DX-LCD37... | 37 views | 0 helpful votes


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Dynex DX-LCD37... | 174 views | 0 helpful votes


If there is no power LED lights up at its front panel, it indicates that the main power supply regulator board inside the TV has the fault. It do not works at all, or it do not get the AC mains power into it to work.
If the power LED at its front panel is lit, and the set do not power up by pressing the power button at the remote control; it is the symptom of a faulty main board.
Fault to the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Dynex DX-LCD37... | 57 views | 0 helpful votes


Universal remote at Job Lot @ $10.

Dynex DX-LCD37... | 44 views | 0 helpful votes


Do a re-tune to this TV, after a reset. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Dynex DX-LCD37... | 562 views | 0 helpful votes


The fault is with its main power regulator board itself. SMPS section is not oscillating. It will be best to contact any service technician. For more information go to http://electronicshelponline.blogspot.com/

Dynex DX-LCD37... | 154 views | 0 helpful votes


If the TV shuts off by itself, there should be some short circuit inside the circuit board. You have to troubleshoot it. If you visit this link,http://electronicshelponline.blogspot.com/ you will get some more details about how to troubleshoot main digital boards. It is very difficult to get pictures from this link, and to copy them here with descriptions, as this window does not allow me to do so. If you wish to know more, check this link.

Dynex DX-LCD37... | 590 views | 0 helpful votes


Found the problem -Emerson TV has only one circuit audio outlet and that
is being used with my HD Box - I have now spliced the red and white
connections from the Hd Box connection to TV - plugged
the spliced red and white connection into the red and white plugs and
its a done deal. Everything works just fine,

Dynex DX-LCD37... | 65 views | 0 helpful votes


Being that it is a Dynex, an off brand, i would toss the TV on craigslist and if you get $40 for it take the money and run. The general rule of thumb is that if you can repair the TV for less than half of the cost of a new set, you repair. If the repair cost is more than half of the cost a new set, you replace. But you also have to factor in the age of the set, brand, and whether or not it has sentimental value.

Dynex DX-LCD37... | 287 views | 1 helpful votes


the problem is the button (vol-) on your TV itself not on remote..

You need to replace it to fix the problem..

Please rate!!!

Dynex DX-LCD37... | 413 views | 1 helpful votes


I said the problem is on the push button on your TV not on remote,,..

Try to replace it to fix the problem..

Please rate!!

Dynex DX-LCD37... | 317 views | 0 helpful votes


Good day!!!!


That problem is usually cause of faulty capacitors on the power supply board..

Just follow this instruction to fix your TV..

1. Open the back cover of your TV.
2. Look at the power supply board..Its normally connected to the power cord..
3. After that,,try to look at the actual image of capacitors if it is bulged on the top so that you can easily determine the bad capacitors..
4. After that,,try to replaced the bad capacitors using soldering iron and soldering lead..replaced the capacitors only with the same type ratings and value..
5. Some of the capacitors not bulged so its better if have a capacitance meter

Dynex DX-LCD37... | 177 views | 2 helpful votes


IF you did not have the proper surge protector for your television it is very possible that it was damaged by the storm.

Dynex DX-LCD37... | 45 views | 0 helpful votes


if contrast etc not set incorrectly it may be a issue on the main board which processes all signal inside the set===a 37 inch might cost you more to fix than to replace.

Dynex DX-LCD37... | 101 views | 0 helpful votes

Not finding what you are looking for?
Dynex DX-LCD37 TV Logo

213 questions posted

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Cindy Wells

Level 3 Expert

6049 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dynex Televison & Video

  • Dynex Televison & Video

Most Popular Question

power surge caused dynex 37 lcd

  • Televison & Video
Loading...