Dynex DX-LCD37 TV - Page 5 - Answered Questions & Fixed issues


Ur tv the power supply board is dead.Take the tv aparts,the board where the a/c power cord plug into it.That the power supply board,replaced it,ur power problems will be solved.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Dynex DX-LCD37... | Answered on Jun 17, 2010 | 542 views


I had the same problem and end up unplugging the power, replugginging and then had to reprogram all of the chanels using the auto program. I still ahve a yy> show uo in the middle of the right had side of the screen when changing channel -- do not know why this happens -- good luck

Dynex DX-LCD37... | Answered on Jun 07, 2010 | 228 views


The LCD controller (T-Con board) or main board needs to be replace to fix the no video failure.
Check this link to find parts for your LCD.

Dynex DX-LCD37... | Answered on May 22, 2010 | 559 views


Check backlight (cold cathode) if busted. Check also for deffective ballast as this have direct effect on the stability of image in the screen. Replace it. These two are the main cause for having black screen.

Dynex DX-LCD37... | Answered on May 17, 2010 | 146 views


open the unit.. Check the cold cathode... if busted replace it.. If not replace the ballast... check also the suplly if its 12 - 20 volts

Dynex DX-LCD37... | Answered on May 17, 2010 | 148 views


Ur LCD inverter board is dead.Replaced this LCD inverter will get ur picture back.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replacement.It a long board in shape.

Dynex DX-LCD37... | Answered on May 14, 2010 | 117 views


Change the little panel with buttons on the side - you'll likely find it on eBay.

Dynex DX-LCD37... | Answered on May 14, 2010 | 177 views


http://www.scribd.com/doc/7581727/Sanyo-TV-LCD-Training-Manual
You need to check your antenna and see if you are actually getting a signal, also hook something up to the External inputs and see if it actually can display a picture? So, it is nearly always my professional opinion that one should always get a "Quote" from the manufacturers recommended service center, I cannot stress how important that last point is. It is even worth the cost of shipping. you see an authorised service agent, will have trained staff, trained on their brand, also they have first hand access to parts, original parts. This will actually save you money and ensure you can actually get it back fixed. Of course asking for a "Quote" also gives on the option of repair or replace. Often my clients,do not go through with repair, unless it is moderate, but in some of the more costly jobs they see it, as do i, that a replacement, with a warranty, is a better option. As an aside here, one could then tear the TV down, and sell the Known Good bits. You'd be surprised who needs parts, i myself often must by from third party sources to effect a repair. So money could be recouped, somewhat,and help out someone else.

Dynex DX-LCD37... | Answered on May 04, 2010 | 284 views


You need to find the correct input where the cable box is hooked into

Dynex DX-LCD37... | Answered on Apr 24, 2010 | 653 views


I had the same issue when connecting through HDMI 1. I tried one of the other three and it works.

Dynex DX-LCD37... | Answered on Apr 05, 2010 | 920 views


YOU CAN'T!
This is from another website, I thought you might like a second oppion too!
"For your information no one can repair cracked LCD Screen. In order to solve the LCD panel cracked problem, the best is to replace with a known good LCD panel."

Dynex DX-LCD37... | Answered on Apr 01, 2010 | 228 views


try to configure the setting of your desktop...
right click-setting-screen resolution-adjust to 1024 by 768 pixels.

Dynex DX-LCD37... | Answered on Mar 26, 2010 | 230 views


You can buy almost any wall mount for it, just be sure of 2 or 3 things... 1st the location, you have to screw some rather large bolts into the wooden studs in the wall so check where it will be located... 2nd weight and size... You want a mount that will be able to hold up the weigh of the TV, usually the size will be between 32" to 40" (various mount sizes) Just make sure the size 37" is between the size lengths... and 3rd that it has a "tilt" adjustment... due to the placement of the TV you might get either reflection off of a light source or you may need to change the angle so that you can see it better on the wall... Hope this helps out and if in doubt be sure to ask someone at the store you buy your equipment (TV, Audio, Games, etc)...

Dynex DX-LCD37... | Answered on Mar 25, 2010 | 373 views


PRESS enter on your remote to see what res. you are in. tv recieves hd,if cable box is not outputting 720 or 1080 tv cannot reconize it.

Dynex DX-LCD37... | Answered on Mar 23, 2010 | 173 views


Use the Admiral codes. I hope this was of some assistance.

Dynex DX-LCD37... | Answered on Mar 23, 2010 | 160 views


Not sure if you figured it out yet, but I bought the same set, about the same time you did, and had a heck of a time finding the code that worked on the Dish Network 5.4 IR remote.
I *FINALLY* figured out today that it uses the 3rd one listed for Sansui, which in the case of Dish Network, is 721.


Dynex DX-LCD37... | Answered on Feb 23, 2010 | 952 views


I know you've probably figured this out by now, since you posted last May, but I figured I would post the solution, since I just found it, and someone else may want to know.
I bought one of these sets the day after Christmas 2009, and finally figured out the code that works with the Dish Network 5.4 IR remote.
I did a Code Scan, and found that the code that works is 721. In the Dish Network listing, this is listed as the third code for Sansui.

Hope someone finds this useful, even if it's too late for you.


Dynex DX-LCD37... | Answered on Feb 23, 2010 | 769 views


You can connect with RCA to RCA & Select Source in LCD TV - AV

Dynex DX-LCD37... | Answered on Feb 19, 2010 | 110 views


Here is the manual. See page 7.

Dynex DX-LCD37... | Answered on Jan 18, 2010 | 1,653 views

Not finding what you are looking for?
Dynex DX-LCD37 TV Logo

213 questions posted

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6068 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...