20 Most Recent
Kenwood KDC-W3037A CD-receiver, 4X50W MP3/WMA/CD-Receiver CD Player - Page 4 Questions & Answers
Alpine TMX-R2000, how do I get the sound to play over the speakers?
Hi,
if this product instructions are not useful to help you install your device in the car and get the sound playing properly, I would recommend using a mobile mechanic to hook up the device and debug it for you as this will save you much time. But you can re-attempt the install based on the instructions once more as you might have accidentally skipped a step.
Thank you.
How do you set the screen right from backward on a kenwood DDX 814
Hi,
Please look for any rotate arrow or circle with an arrow on it's border. If you can't find this, please restart your infotainment system and check your screen again. If still having issues, please use page 101(to start) of your infotainment manual to troubleshoot the issue.
Thank you.
How can I fix Rxd-655 protect mode?
Check the speaker wires. Make sure that damaged/frayed wires aren't touching other wires or the case of the mini shelf system. If the protect message persists, then the short could be internal to the system. I know service manuals are available online for the Kenwood RXD-655. However, it may not be worth repairing the system.
I hope this helps.
Cindy Wells
I need the codes to my Kenwood stereo KDC BT 375u
please tell what CODE meansbluethoothor SiriusXM??or what? CODE DO YOU mean.page 8 , did you make it to page 8 , tell it your LANGUAGE>just buy it new. the radio or USEDor a used car just bought with this as old as 2018 radio.the radio must be setup first , per pages 8 on, this radio is smart, the display shows full errors is full language words. like, "UNSUPPORTED DEVICE"the only locks on this RADIO heat for SiriusXM optional TUNER, <<< got thisis the detached face plate clean on the back side ,gold pins/ or filthy. must be kept clean that.
Kenwood xr600-1 I have it Hooked to a jensen 1200 watT and a capacitor red lights on but sub still hitting hard as they should, but my bat? being drawn way down kinda hot whats wrong ?
Those capacitors don't add any power they just store power in between bass notes but if you don't have enough current going to it through your power wire and don't have a good ground to bare shiny metal with a wire lug your not going to get a good connection. Also I spray clear coat or rubberized under coating or something over the ground connection so it doesn't corrode in the future and cause you to loose current. If you have the small Jensen 1200 with the lights on it those amp really only put out about 600 true watts. The type of wire your using and fuse sizing makes a big big difference. I used to only use OFC (Oxygen Free Copper) Audio power wire which is pure copper butearnwd about welding cable and it carries much more current and is cheaper and you cab buy it by the foot at ACDCWIREANDSUPPLY.COM so you don't have any extra wire. The shorter a wire is the more current it can carry. Also if you don't have your big 3 done under the hood or know what it is look it up on YouTube. I always run a AGM battery in the back close as possible to my amp and a $20 Stinger Pro adjustable Voltmeter off the amp itself so I can see the amps voltage in real accurate time. Get you a AGM battery, AGM battery, $20 Voltmeter, make good grounds to shiny bare metal. You can get a 10 pk of copper wire lugs online for $10 or less.
Kenwood Kmm328 is Blinking RED
Take it to a Kenwood authorised repair shop. The face plate could be the fault, try the new face plate in the old radio to check.
Not finding what you are looking for?