20 Most Recent
Kenwood KDC-W3037A CD-receiver, 4X50W MP3/WMA/CD-Receiver CD Player - Page 6 Questions & Answers
Kenwood kdc-w3041 protect mode
Hello ia737,
The "protect" display is probably being caused by a shorted or grounded (touching vehicle chassis or other ground) speaker wire. Check the speaker wires for bare spots, etc and insulate or replace as necessary.
You do not need to remove the fuses to force a "cold reset" of the W-3041. You can simply press the "reset" button on the front of the unit. It's the little recessed button at the lower left of the volume control. Use the straightened end of a paper clip or ballpoint pen to momentarily hold the button in.
Hope this helps.
Code for Kenwood DPX-044
The code is based on the serial number of the set. There are companies that will sell you the code. If it came with the vehicle as factory standard issue, the dealership will give you the code if you show them the registration document with VIN Number. Also look for a small white sticker in the glove box or the owner's manual.
https://www.google.com/search?q=Code+for+Kenwood+DPX-044
..
How do I unlock my Kenwood KDC 7009 receiver
Press the "Auto" button and "Track up" on the face of Radio at the same time until the four dash lines disappear. Enter the security code using your Kenwood remote. Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'. Enter the Security code using your Remote
Not finding what you are looking for?
