20 Most Recent Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner - Page 9 Questions & Answers

http://phone.manualsonline.com/search.html?q=uniden+ubc92xlt+scanner&submit.x=42&submit.y=16 Go to this site and download the manual and then go to www.scanning (what area ,state,city,country your in) .com and you should be right where you need to be load the numbers in and you have it. or contact me [email protected] cheers :-)

here's what you can do:-disconnect the printer from the computer-turn off the printer-inspect for anything foreign inside like jammed paper-turn the power back on-remove the ink cartridge-check the chip connnector at ink tank and at head carriage. If its dirty clean it with soft moist cloth. -check the status monitor. which ink tank not recognized. -press ink light (1-4 times) depends on number ink tank not recognized, press 1 time again, carriage will move co replacement position, unplug and plug again all ink tank, press ink light 1 more.if that doesn't work, replace ink cartridge ONLY if you have a spare. DO NOT BUY new ink as the printer is bound for repair.

Initiate head cleaning process (May need more than one) from the menu.

Your black cartridge may be dried out. Repkace it and/or clean with warm water until ink appears on the bottom nozzles

You will most likely need to move them to the file you want them in and then rename. Most printers will automatically place them in "scans". You can specify where to put them but since I don't know whether you are scanning to a flash drive or directly into the computer or which method you are using it's probably less confusion to just move and rename.

Fiend your solution direct from EPSON. Here is your solution...

http://www.epson.com/printer/prob676ijt65/solution

takiqq1