20 Most Recent Kyocera FS-1016 Printer - Page 5 Questions & Answers

You may have gotten an incorrect message and removing and replacing the drum is a step in right direction. But if you continue to get the same message I am afraid you will have to replace the drum - they do wear out.

Kyocera FS... | Answered on Aug 19, 2015

cleaning with cloth and brasso

Kyocera FS... | Answered on Jul 08, 2015

Can be many things usually it drum decay and the drum unit or the charger unit maybe needing replaced

Kyocera FS... | Answered on Mar 16, 2015

assuming the toner coverage per print isnt excessive , the problem could be any of the following,
toner - have you used 3rd party toner ( compatibles, remanufactured) - if yes - you could have put the developer toner ratio out of spec- fix by replacing developer tank AND toner.
if no - is there any blockage in the toner transfer pipe between toner cartridge and developer tank/ is the pipe split leaking toner if all looks ok , test the toner pump using the service commands., if toner is moving ok the problem must lie in the dev tank - the fix is still to replace the dev tank - good news is its plug and play comes with instructions on fitting and setting up .

Kyocera FS... | Answered on Feb 10, 2015

Kyocera compatible does not mean Kyocera genuine. Not using genuine toner can invalidate your warranty. If that doesn't bother you then the printer detecting a non-genuine cartridge is not an issue.

Kyocera FS... | Answered on Feb 05, 2015

laser unit

Kyocera FS... | Answered on Dec 05, 2014

check if auto rotation is on or off

Kyocera FS... | Answered on Nov 25, 2014

open the back of the machine two screws hold it in

Kyocera FS... | Answered on Nov 25, 2014

look for the trigger that hits the switch to tell the machine it is close usally i thin long piece of plastic

Kyocera FS... | Answered on Nov 25, 2014

You can connect the printer with a parallel cable, open cmd and type
echo !R! FPLC 0; EXIT;>lpt1.

Kyocera FS... | Answered on Oct 11, 2014

This is a machine serialnumber mismatch between to EEprom's

Kyocera FS... | Answered on Oct 02, 2014

Fax board problem

Kyocera FS... | Answered on Sep 30, 2014

could be a number of things but could be the dv unit.

Kyocera FS... | Answered on Sep 30, 2014

Upgrade your firmware on the machine (a tech will need to do that) and download the latest KX driver from kyocera support

Kyocera FS... | Answered on Sep 30, 2014

As an error, the C-4200, refers to laser unit. Sometimes the main charge (mc) cause this error. Remove the mc and check the sound of the laser. If you don' t hear the laser sound, then the problem is the laser unit

Kyocera FS... | Answered on Sep 28, 2014

go into service mode and print out the maintenance sheet and look for the ucode for factory reset

Kyocera FS... | Answered on Aug 11, 2014

Not finding what you are looking for?
Kyocera FS-1016 Printer Logo

97 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers


Level 3 Expert

1363 Answers


Level 3 Expert

85223 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FS Kyocera

  • FS Kyocera

Most Popular Question

service error 6000

  • Office Equipment & Supplies