Hello & Welcome to FixYa
F35 error means that there is some sort of issue
with the steamer electronic board and analog pressure sensor has gone bad.
Check that the hose is firmly attached with the washer and is not blocked. You
can also check the water level pressure switch operation. Please get back to me
if you have any other questions.
Kevin
Hello & Welcome to FixYa
F35 error means that there is some sort of issue
with the steamer electronic board and analog pressure sensor has gone bad.
Check that the hose is firmly attached with the washer and is not blocked. You
can also check the water level pressure switch operation. Please get back to me
if you have any other questions.
Kevin
F21 Fault Code Repair LONG DRAINIf the drain time exceeds 8 minutes the water valves turn off.NOTES:After 4 minutes the "Sd" error will be displayed, then 4 minutes later the "F/21" error code will be displayed.Press PAUSE/CANCEL two times to clear the display.
LONG DRAINIf the drain time exceeds 8 minutes the water valves turn off.NOTES:After 4 minutes the "Sd" error will be displayed, then 4 minutes later the "F/21" error code will be displayed.Press PAUSE/CANCEL two times to clear the display.
1. Check the drain hose and make sure it is not plugged or kinked.2. Unplug washer or disconnect power.3. Check the electrical connections at the pump and make sure the pump is running.4. Check the drain pump filter for foreign objects.5. Plug in washer or reconnect power.6. If the above does not correct the problem, go to step 7.7. Unplug washer or disconnect power.8. Replace the pump.
LONG DRAINIf the drain time exceeds 8 minutes the water valves turn off.NOTES:After 4 minutes the "Sd" error will be displayed, then 4 minutes later the "F/21" error code will be displayed.Press PAUSE/CANCEL two times to clear the display.
1. Check the drain hose and make sure it is not plugged or kinked.2. Unplug washer or disconnect power.3. Check the electrical connections at the pump and make sure the pump is running.4. Check the drain pump filter for foreign objects.5. Plug in washer or reconnect power.6. If the above does not correct the problem, go to step 7.7. Unplug washer or disconnect power.8. Replace the pump.
110 questions posted
Usually answered in minutes!
9,125 Questions
187 Questions
34 Questions