20 Most Recent
Dynex 32 in. LCD Flat-Panel HDTV - Page 6 Questions & Answers
Monitor won't connect to cpu
OK,Hello. The screen resolution (probably the refresh rate also) is set higher then what your new monitor is designed for. boot your computer and hold down the F8 key this should bring up the Advanced Boot Options window. you will see a list . select Enable Low Resolution......using the up and down arrows -press enter or enter key. This usually works well for windows 7 and Vista. Now If Windows starts to your desktop you can now set your resolution and refresh rate properly- set the refresh rate at 60 Hz. Window should give you a Recommended Screen resolution rate. go ahead and use it. Good Luck
Red color is completely gone out of the LCD flat screen
You can try performing a factory reset of the TV. Go into the service menu (Press, then release the INPUT button on the remote, then key in 2580). Scroll down to "Other Settings", then go to "EEPROM Init", then press enter, select YES and press enter. This will reset the TV to the factory defaults. Good luck!
Not finding what you are looking for?