20 Most Recent Dynex 19 in. LCD Flat-Panel HDTV - Page 4 Questions & Answers

Try looking here,
http://www.dynexproducts.com/skins/skin_1/Topics/Documents/Dynex%20TV%20Universal%20Remote%20Codes%207-9-07.pdf

You need HD cable or a station that brodcasts in HD

MY PROBLEM IS THAT WHEN I HOOKED UP MY DVD PLAYER (PANASONIC) THE MOVIES COME OUT IN BLACK AND WHITE. WHY IS THAT. PLEASE ADVISE

Look on the remote for a button called input. go from choice to choice there and you should get a signal.

You need a better antenna. Go to www.dtvanswers.com for more info.

Need to port audio from the headphone out jack to the audio in on the tv. May need to convert mini-sub to rca.

The LCD panel is defective...sorry I have to give you bad news.

Buy eyeglass cleaner , walmart etc. do not use windex or cheap alcohol. 70% IS TOO LOW..

I called the technical support and they told me that there's no codes available for the Daenyx tv's so it will never be compatible with illico or express vu neither a universal remote control!!!!! damit

Hi!

Is the picture okay? If yes! Then probably the signal tuner, if the component inputs are part of the main board. then it is the main board.

Hi dlcase777,
Good news, your TV has both Digital and analog tuners. You will only need an antenna to recieve digital OTA (over the air) signals.
I have provided a link for information on antenna types and the channels you will be able to recieve.
http://www.antennaweb.org/aw/welcome.aspx

Thank you for the oppurtunity to help and please rate this solution as a FixYa.
Lone99star Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Hello,

Searching with the given information i found the following link:

Dynex Homepage

Hope it helps

Go to lidl store and buy a universal remote control for £6,the sheet that comes with the remote has thousands of codes but the nearest i see to yours is MAGNAVOX. Hope this helps. Ted10

First of all, digital/HD signals are broadcast at UHF frequencies. You need to know if you have an UHF antenna and, if you do, that it is pointed to the TV stations broadcasting HD.

Second, since most TV's have a setup mode that automatically searches for channels that are able to be received, go to that "Setup" menu on your TV and start the auto search. It will list both analog and digital stations. Note that the analog channel may be, for instance, Channel 39 but the digital channel will be Channel 39-1. Tune to the "dash 1" channel.

unzip95. Contact MCM Electronics in Centerville, Oh. 1-800-543-4330. Maybe they would send you a users manual.

Dear Customer

Sir/Madam the memory of the content(TV) is to store about only thirty channels so u can not able to store more than that,if in case you want clarifications just get linked with below site which may help you sometimes.
http://www.northjerseymall.com/Mall/CommonPages/contactv3.asp

Thank you