20 Most Recent
Westinghouse W4207 42 in. HD-Ready LCD TV - Page 5 Questions & Answers
I have a Westinghouse LCD TV that is 1.5 years
I'm willing to bet it's the main board. Its the board that all the video and audio inputs. What is the model number I could find the part for you. You could change it out yourself, Its not that hard. Let me know.
My w4207 worked the other day, now it won't turn
Unplug your tv from the wall for at least 20 minutes,plug power back in if problem is still present you may have a failed power supply inside the tv.
Could be as simple as a blown fuse on the power supply circuit or bad power transformer or other.
Programming remote
ok here is two solutions for ya get alold of Tops Electronics in Haverhill ma they usually have then if not try shoppjimmy,com or remotes.com
I have a westinghouse w4207
Hi
Thanks
for using FixYa. If the TV isn't turning itself on(no picture) then the fault
protection circuit has detected a fault and has turned down the TV. You'll need
to check various things to find an answer which part is bad. Please
check these---
1. Check
for signal cables at the back and also try unplugging the TV for 8-10 hours to
reset it.
2. Swollen
/bulged capacitors on the power supply board-- This happens due to overheating
of capacitors.
3. If the
capacitors are fine then you'll need to check for connectors on all the boards
and also the fans if they are working fine.
4. Make
sure the lamp connections are fine and ballast is not burnt.
Note--
Please make sure to turn off and unplug the TV for at least 1 hour
(this will drain off current from all components especially capacitors) before
you perform any repairs. Also note that the TV consists of very high voltages
even when it is in OFF condition.
Try to
reset the TV by unplugging it for 8-10 hours.
Please do
accept the solution if the issue is resolved or else revert for further
assistance.
Thanks
Rylee
Not finding what you are looking for?