Breadman TR2200C Ultimate Bread Maker - Page 7 - Answered Questions & Fixed issues
Washer that holds paddle on Breadman Ultimate bowl
Hi do you still have the manual? If so then look at the very back there should be a page with a choice of repairers that can often point you in the direction of where to go or even supply you with a new one. Failing that you could see if there is a website listed for the manafacturer and ask them.
Breadman TR2200C Ultimate Bread Maker pan leak
I was finally able to find a same size of heavy duty shaft seal from McMaster-Carr and installed on the pan with liquid weld after greased its inside. I put an extra washer on the shaft as well since the shaft itself was worn a little and wobbled . I needed a new snap ring to secure the spindle in place. Old one was rusted and disappeared.
Our bread machine is now back to work and we enjoy having a tasty bread every morning again.
I,ve been looking for apaddle for my breeadman
Hi,
Try ebay...
http://cgi.ebay.com/Breadman-Bread-Machine-Paddle-Blade-TR2500BC-Ultimate_W0QQitemZ390094347444QQcmdZViewItemQQptZSmall_Kitchen_Appliances_US?hash=item5ad36f5cb4
Hank...
(if link does not work go to ebay ..bread machine paddles and hunt around).
Breadman 20274 breadmaker paddle
Best thing to do in this situation would be to call Breadman directly to get a paddle. If that's what you've done already, you still might want to place an order for one of the paddles (ask to be put on a backorder list, if possible). As long as you have an order placed, you should be one of the first to get one of the paddles as soon as they come in.
If you haven't contacted Breadman already, the easiest way to find their phone number is to look either on the breadmaker itself (back or bottom), or in the back of the manual--either one of these places will usually have the company name, contact address, and a phone number at which to reach them.
Good luck! :)
Doesn't bake
Our machine is 4 years old and works well. However, our breadpan is leaking. We can't find another. If you would like to purchase the machine, we would be willing to sell it.
[email protected]
I need to order parts (pan)
Ok-here you go! Breadman looks to be part of Salton. There is a contact link on the homepage:
http://www.saltoninc.com/brands/breadman.html
Bread pan pops out during the kneading 2 cycle
I had a similar problem after using the same machine for several years. It worked well for years and then popped off the shaft whenever I had a rather stilll dough. To solve the problem I bent the clips on each side of the bread pan that hold the pan into the machine up and toward the center of the machine. I did not use any tools to do the bending. It solved the problem. The pan no longer jumps up out of the clips and off of the shaft.
I have a Breadman Ultimate
Check the power socket it may be worn. If you suspect the plug it is easy to install a new one. Just keep the polarity correct
Sides of loaf caving in after removal from the pan.
Are you letting the bread cool thoroughly before removing from the pan? Also, sourdoughs tend to cave in as well. You could also have too much liquid in your mix - try reducing your liquid by a tbsp at a time. Too wet of dough will cave after baking.
Squeaks while kneading.
HI
This is normally the bearing in the bottom of the pan, no major worry.
Just put a spot of olive oil on there, should be fine
Sunken loaves
If you are using mixes, check the best by date. If you are using your own recipe, buy new yeast. If it gets too old, it's dead.
Not finding what you are looking for?