Breadman TR444 Bread Maker - Page 9 - Answered Questions & Fixed issues
Breadman Ultimate bread pan leaks.
Remove the rubber washer that fits around the center post, split it into the two halves and glue a #31 O-ring (9/16ODx5/16IDx1/8) to the bottom washer. This worked on my pan on a TR2828 and are no longer available. It worked for mne so far.
I have no Owners Manual
Hi, you can get the user manual on the link below.
http://kitchen.manualsonline.com/mdownloads/70683c2c-b5e5-c6d4-bdf6-0d93d1e34e46.pdf
Take care
I need a new round
Hi, That "gasket" can not be replaced. It is part of the sealed bearing assembly located on the bottom of the pan. This bearing fails after time and the breadpan needs to be replaced if you can find one.. Check out ebay or amazon for a bread pan. Sorry for the bad news. Hank
Breadman Breadmaker - the dough sticks to the
Hi...Just take the paddle out at the end of the kneading cycle and before the final rise. If your machine does not have a pause feature, take the pan out of the machine to be safe. Hank
I have a Breadman Ultimate and use a gluten free
Here's a solution from my wife: After the last mix in the cycle, remove the dough and place it in small bread pans and bake in the oven. She had a bread machine that mixed well, but the baking part of the machine was less than great.
Worked great for us!
k
I need a replacement bread pan and kneading paddle
My bread pan is not too bad, but my kneading paddle is rather beat up, so I kept searching online and finally found a site ABTECPARTS.com that had the kneading paddles so I ordered two. Hopefully that will take care of my problem. It helped that I found out accidentally that the same paddle (part # 20274) fits three other Breadman machines (TR2200, TR220-C, & TR2200--97) so I just kept searching and about 2 a.m. I found this site. I hope this will help others looking for paddles.
Not finding what you are looking for?