Top 20
Bulova Watch - Page 3 Questions & Answers
I have a tonino lamborghini
The stainless steel band broke on my Tonino Lamborghini watch. Can anyone tell me how and where to get a new band? Or even a replacement link for mine?
1/7/2011 5:09:24 PM •
Bulova Watch
•
2,102 views • 2 helpful votes
THIS IS A BOLOVA
Between $700 usd and $1500 usd depending on the quality.
3/28/2011 12:06:47 AM •
Bulova Watch
•
131 views • 0 helpful votes
I have lost the warranty
Try going back to the supplier to see if they can supply you with a proof of purchase.
I would expect suppliers of this quality of watch to keep a record of their sales.
Good luck.
3/10/2011 6:17:23 AM •
Bulova Watch
•
106 views • 0 helpful votes
I have a fake chanel
You will probably need an assistant to remove your watch.
If you still can't get the watch off, let your assistant use a small screwdriver to remove the spring loaded pin that holds the strap to the lug of your watch.
( This can be done by putting a small tension on the strap pressing the screwdriver against the pin and pushing it in the desired direction. Some practice may be required!
1/7/2011 10:02:13 AM •
Bulova Watch
•
215 views • 0 helpful votes
I have an ANIKE Chinese watch Sports watch the
hold down the adjust button until something starts blinking. press set to change it to what you want and mode to go to the next thing. when you are finished press adjust to get it back to the normal screen.
12/2/2010 10:28:35 AM •
Bulova Watch
•
587 views • 1 helpful votes
Curtis and Co. Big Time 3 zone watch w/ temp
Crown(stem) at 10 O'clock has air inlet for temperature, does not move. Crown at 8 O'clock is for setting 3rd time zone next to it. The two buttons on the right of the case, above and below, set 2nd time zone which is at the 6 O'clock position of the large dial. To set #2 push top button till min. hand moves 1 min., then push bottom button to move 1 min each time or hold for rapid movement. Large crown sets date and large dial. Unscrew it (counterclockwise) then pull out to first click, then set date turning crown clockwise, continue to pull out till 3rd click which is where you set the time on the large dial.
12/29/2010 11:29:09 PM •
Bulova Watch
•
264 views • 0 helpful votes
B.m.w. geneve 250 watch what are the four small
If it's the same watch I have, the four dials from right to left are day of week, hours left in the day, date 1-31, and possibly a chronograph (mine makes 2 revolutions/minute). On the case, there are three large knobs on the right and two small flush screw-like objects on left. The large knobs (top to bottom) are month selection, time set, and day of week select. Month and day can be selected by pushing the knob to the desired date. On the left, you will need a fine pen or stylus to press the center. Top to bottom, these two buttons control year and date selection.
11/23/2010 1:51:50 PM •
Bulova Watch
•
682 views • 0 helpful votes
Shorten the band on a
Thank you for contacting FixYa.
Place the watch face down on the cloth. This will help keep your watch from being scratched.
2
Examine the links closest to the buckle. These links will have small pin holes on each side of the link, as well as a small arrow engraved on the inner side of the band. These indicate the direction the pins must be removed.
3
Place the driving tool (a thumbtack will work) inside the pin hole in the band and push the pin out in the direction of the arrow. Remove the pin carefully from the other side.
4
Repeat Step 3 to remove any links needed to adjust the band properly.
5
Reattach the band to the buckle. Attach each end of the buckle back to the bracelet, driving the pin in the opposite direction from how it was removed (opposite the arrow).
Best regards. Jewel
9/15/2010 2:19:44 AM •
Bulova Watch
•
3,817 views • 4 helpful votes
Hi there. I received a
Hello there, the only way to change the date on this watch is manually. You have to pull the crown out (the only "pin" on the side there) and then push it back in half way. Then you should be able to twist the crown (try both directions to see which one advances it) and it will change the date. They actually made two variatioons of the SA4.134.33, one that allows you to change the date this way and one that has to have it set manually. If yours does not advance the date by pressing in half way and turning it then you will need to pull the crown out as far as it will go and just adjust the time manually forward until it advances the date... every 24 hours it will go forward one day, just keep turning it until you get to the desired date.
Thanks so much, please reply to my answer here with any questions you have.
Tim G
11/2/2010 2:29:53 PM •
Bulova Watch
•
648 views • 1 helpful votes
I have a new longines
The battery may be near diplition and is not unusual given the length of time it can take for a watch to sell, but at any rate it needs to be returned for a possible exchange.
1/7/2011 11:13:16 PM •
Bulova Watch
•
86 views • 0 helpful votes
Remove links from metal band
Take your item to a watch repair facility where they will remove the links and have you sized up on the spot, maybe at no charge.
12/31/2010 11:24:06 PM •
Bulova Watch
•
98 views • 0 helpful votes
I own the new hybrid
on close inspection of the bracelet you will see that the holes which the pin is located dont look the same, the other is much deeper than on the opposite side. the deeper hole is bottom side of the pin while the other is the top. push the pin from the bottom this will loosen the pin to the top.
be careful using the tools.
12/14/2010 8:47:52 AM •
Bulova Watch
•
137 views • 0 helpful votes
Not finding what you are looking for?