20 Most Recent Sony PlayStation Portable (PSP) Slim (PSP-2000) Console - Page 8 Questions & Answers

here is a cheap and fast repair guy. he has repaired my PSP several times and does excellent work.

sounds like the display board went. here is a cheap and fast repair guy. he has repaired my PSP several times and does excellent work.
http://www.psprepairservice.com/

A decent condition PSP with some games should go for around £70 on ebay. Hope this helps

y do u hav to? yes u can
anyways it costs a lot

Please be more clear. What do you mean by "grounded" ?

You have to configure your USB connection to PC. What shows up as the drive in your PC when you connect your PSP to it is one of the 4 FLASH folders. Do the following;
1. In your PSP main screen, press your "SELECT" button and XMB Menu will show up. 2. Scroll down to the "USB DEVICE" option. 3. Loot at the value in the right, it should either "Flash 0", "Flash 1", "Flash 2", or "Flash 3". 4. Press Arrow Right until the value changes to "Memory Stick Value".
Exit and connect to your PC again and you'll see your 8GB MS this time...

Hey there.
Before updating to 5.50 Gen-D3 (which is a higher version than yours), try knowing your PSP MoBo first. Why? Because, you may brick your PSP with the upgrade. Use PSPident to do that. Here's a link for that (MONSTER here!!!). Don't mind the monster, I just thought it's kinda nice doin' that. LOL
Now, do that PSPident in your PSP. If your MoBo appear to be TA088v3, DO NOT (never ever) upgrade to 5.50 Gen-D3 or you will have your PSP dead... If your MoBo is LOWER than TA088v3 (like, say, TA085v1 or v2) then go on with the 5.50 Gen-D3.
If upgrading doesn't solve your problem with playing homebrew, you may have downloaded a corrupted ISO or CSO file... Find a new torrent for that game again...
Happy playing...

You can buy games from your local Media and computers stores.

these files are for psp's that have custom firmware

Hi.
Try this;
1. Enter into XMB menu by pressing "select" button while on main screen. 2. Scroll down to CPU Clock Speed (second from top) 3. Press scroll right until you see 333/166 on its value
Try playing games again if this solved your problem...

no when you update past fw 6.0 you need to wait till next year for a custom fw for GEN D6

If you have used pandora battery and MMS correctly, I think you got the TA088v3 PSP Motherboard. It's unhackable and is Pandora proof. To date, no procedure is known to unbrick these kinds of PSP MoBo. Others have tried replacing their MoBo and other send it back to S0ny and pay bucks for its replacement.
If you believe you got the non TA088v3, you might be missing few of the procedures in Pandora unbricking. You may also check your MMS and re-create it.

It could be dust problem..if the warranty is over you can dismantle the console and try dusting the interiors with a silk brush...dont use water for cleaning,,,if this doesnt helps you can try replacing the rubber bush below the switch.be sure to get an appropriate one..(please dismantle only if you feel confident enough or else seek the help of expert friends..or an electric service shop will do that for you for nominal cost..

il help you m8 get utorrent and visit piratebay but remember you risk bricking your psp il do it all for you for very competative prices visit my website xbox360repairspro.webs for more help

visit my website xbox360repairspro.webs for more help

maybe you didnt assemble it correct or maybe you need a new small resister on the motherboard visit my website xbox360repairspro.webs for more help

visit my website xbox360repairspro.webs for more help or send it and il do it for you

please go to my website xbox360repairspro.webs.com

please check this out HERE