Top 20 Daewoo DWD-WD1353RC 4.5 Cu. Ft Capacity Washer 1 300 RPM 11 Cycles Questions & Answers

I could not find DWC-LD1213 manual. I am sharing the link for same series manuals. It may help you. User manual Daewoo DWC-LD1412 (English - 32 pages) Daewoo DWC-ED1212 user manuals download (nodevice.com) Daewoo DWD-1213'S Manuals ' ManualsLib

Repairers in this link. You probably have a broken suspension spring. https://www.google.com/search?q=Daewoo+washing+machine+service+centre+Jeddah ..

You can try spraying the buttons with electrical switch cleaner. If there is a membrane behind the buttons, you will need to remove it and clean the contact that are behind. Or you replace the panel, but it likely is part of the main control board. Need model number in this Search Query! https://www.google.com/search?q=Mini+Daewoo+washing+machine+parts ..

The only way to answer this is to contact repairers in you local area.

You don't order by size, you order by 'make model part'. https://www.google.com/search?q=Daewoo+washing+machine+F1013+spares ..

Hi, Please check ebay to help you find the spare parts. Thank you.

It could be the starter capacitor for the electric drive motor. You may also look to see if the brushes that sit on the armature are not stuck and free to travel while sitting completely flat on the armature to make the correct contact. There is also a speed sensor for the motor that may be bad. CAUTION: Make sure the machine is unplugged and the capacitor is drained to avoid shock.

Call for service. It likely to be timer or control board. It needs correct diagnosis. https://www.google.com/search?q=Daewoo+DWF-300SLDS+shuts+off ..

If it is a top loader, there is a clutch, with clutch dogs and below that, a gearbox. It is not a nice job full of black grease and often needs special tools. Call for service.

possible cogs under agitator bad or loose belt

As these manufacturers use the same type board in their machines, video will help you

TRY A DEAWOO DEALER

???? ?? ??? ?????????? ?????? ??? ? ???? ?? ?? ????? ?? ????? ????

Daewoo Washing Machine Error Fault Code = E9 Fault Detected: Pressure Sensor Error Washer Has Detected: Error with the pressure switch or level sensor Check / Repair / Fix = Wiring to level sensor - Level sensor

Daewoo Washing Machine Error Fault Codes

https://removeandreplace.com > 2015/11/02 > daewoo-...

Nov. 2, 2015 - The Daewoo generalized error fault codes below are to give you an "idea" as to what part is at fault. ... Daewoo Washing Machine Error Fault Code = E9 ... If your Daewoo Washing Machine Error Code is not listed here, check ... Mine is Daewoo washing machine DWF-8288, showing E1 and won't spin and ... ..

A broken belt may cause that.

EBay and buyspares.com and Sears official website and also on Amazon too.

Use the washing machine manual or search it online. Unless we see what is happening we can't really help you.

If the belt mechanism is either loose or slipped or that the belt is damaged or worn out it might not be able to spin with enough or spin at all then . If the belt is broken or fully off the rollers then it can't spin at all. A washer that won't spin is not washing. If it can not agitate clothes and then clothes don't get clean. Call a repair person to have a look at your washing machine to see what the issue is.

No Reset procedure mentioned anywhere https://www.manualslib.com/products/Daewoo-Dwd-1212-4405009.html Try cutting the power and reconnecting whilst holding the power button in. If that doesn't work, try holding the Power and Pause at the same time. Hold for about 10 seconds.

According to the service manual,

Daewoo Washing Machine Error Fault Code = LE
Fault Detected: Washing Machine Door Open
Washer Has Detected: Washing machine detected door as open or not locked
Check / Repair / Fix = Close door – Door lock switch – Door latch – PCB