20 Most Recent Blomberg BRFB1150 | 11.7 cu. ft. Counter-Depth Bottom-Freezer Refrigerator - Stainless Steel - Page 3 Questions & Answers

Are you talking about the drain pump?

Tigten it up.

It depends upon the material you are trying to repair but Araldite or any good quality two part epoxy will suffice to fill the hole. Ensure the area is dry and clean then build up the repair . Larger holes will require multi additions of epoxy.

Put in olle dishwasher parts and where you live . This should come up with shops that do the spares

Question edited for clarity. Question moved from Cars and Trucks category. This appears to be a Dutch Maker, we are in North America. There is some help here, but I don't see the wiring for that model, although there is a parts manual. The link may work better for where you live. https://www.google.com/search?q=elettrobar+e35h+wiring+diagram+pdf ..

These error messages both point to a sensor problem. Error 12.1 This error is related to the boiler temperature sensor. Consider the following: Look for a short circuit in the sensor. Inspect the cables and plugs for any issues. Ensure the sensor is correctly connected.If needed, replace the boiler temperature sensor. Error 22.2: This error pertains to the tank temperature sensor. Possible causes include: Short circuit in the sensor. Cable failure or plug failure. Sensor not properly connected. You may need to check the sensor wiring, connections, and replace the temperature sensor if necessary.

The date of manufacture is determined by the SERIAL NUMBER on the appliance. This dishwasher was manufactured by Whirlpool. The following link explains how to determine when it was manufactured:

http://www.fixya.com/support/r3576437-determining_the_age_of_your_whirlpool_ap

The serial number is usually located somewhere around the door opening. The first two numbers in the serial number identify the WEEK it was manufactured (52 weeks in a year). The second DIGIT in the serial represents the YEAR it was manufactured.

If you have difficulty determining the manufacture date, please post back with your serial number and I will assist you. I hope you find this information helpful.

Make and model of dishwasher may help yu get an answer

There is normally a D-shape that has to be in the right orientation on the spindle shaft. Some have a small recessed Allen screw or a way to adjust. They are all a tight fit. ..