20 Most Recent
Oxo Good Grips 11-pound Digital Kitchen Scale with Pull-Out Display - Page 9 Questions & Answers
UndefinedIntermittent E2 error on Stirling STRSS15 Dishwasher
An "E2" error on a Stirling STRSS15 refrigerator generally indicates that there is a problem with the temperature sensor or the temperature control system. Here are a few things you can try
- Check the temperature sensor for any visible damage or issues. Make sure that it is properly connected and that there are no loose or frayed wires.
- Check the temperature control system for any issues. Make sure that it is functioning properly and that all of the connections are secure.
- Check the wiring and connections between the temperature sensor and the temperature control system. Make sure that there are no loose or damaged wires.
- If the issue persists, you may want to try running a diagnostic test on the refrigerator. Consult the manufacturer's manual for instructions on how to do this.
If none of these steps resolve the issue, it is possible that the temperature sensor or the temperature control system is faulty and will need to be replaced. It is recommended to contact a professional for assistance with repairing or replacing these parts.
1/6/2023 12:21:52 AM •
Dishwashers
•
Answered
on Jan 06, 2023
Arrow single oven user manual
Hi,
please check for an image of your product's dashboard/panel on websites like amazon and home depot. This should allow you to see the names of the faded tags located on your oven. To get the user manual, please reach out to Arrow and ask them to email you the manual. Their phone number is 1-855-326-4757.
Thank you.
12/28/2022 3:34:06 PM •
Dishwashers
•
Answered
on Dec 28, 2022
How do I clear an E1 error on a Bertazzoni Dishwasher (dw24xv)
Hi,
the valve might have some residue within it that causing the error to stay on. Can use an old plastic bottle to create a water-toothpaste mixture (only 4 or 5 drops) and carefully poor some into your valve 10 minutes before attempting to run your dishwasher again. The past mixture should help to clear up any residue that might be leading to the low water flow issue.
Thank you.
12/28/2022 2:56:28 AM •
Dishwashers
•
Answered
on Dec 28, 2022
Dishwasher ADPU 701 WH showes error code F6 E1. Stopped mid cycle. How can I drain the machine ?
Error code F6 E1 on a Dishwasher ADPU 701 WH typically indicates a problem with the water pump or drain system. It is possible that the dishwasher stopped mid-cycle because the pump is clogged or the drain is blocked.
To drain the machine, you can try the following steps:
Unplug the dishwasher: To ensure your safety, unplug the dishwasher from the power outlet before attempting any repairs.
Locate the drain hose: The drain hose is typically located at the back of the dishwasher, near the bottom.
Detach the drain hose: Use a pair of pliers to gently loosen the clamp that secures the drain hose to the dishwasher. Then, carefully remove the hose from the dishwasher.
Place the drain hose in a bucket or sink: Position the end of the drain hose in a bucket or sink to allow the water to drain out.
Check for blockages: Inspect the drain hose for any blockages or debris that may be causing the error code. Use a small brush or toothpick to remove any blockages.
Reattach the drain hose: Once you have cleared any blockages, reattach the drain hose to the dishwasher and secure it with the clamp.
Plug in the dishwasher: Once the drain hose is securely in place, you can plug the dishwasher back in and try running a cycle to see if the error code persists.
12/27/2022 6:36:25 AM •
Dishwashers
•
Answered
on Dec 27, 2022
Dishwasher ADPU 701 WH showes error code F6 E1. Stopped mid cycle. What to do ?
Error code F6 E1 on a dishwasher typically indicates a problem with the electronic control board. This can be caused by a number of factors, including a power surge, a malfunctioning component, or a problem with the wiring.
Here are some steps you can try to troubleshoot and resolve the issue:
Check the power supply to the dishwasher. Make sure that the outlet is receiving power and that the power cord is securely plugged in.
Reset the dishwasher. To do this, unplug the dishwasher for a few minutes and then plug it back in. This can often reset the electronic control board and resolve the issue.
Check for any loose or damaged wires in the dishwasher. If you find any, tighten them or replace them as needed.
Test the electronic control board. If you have a multimeter, you can test the control board to see if it is functioning properly. If it is not, you may need to replace it.
Check the water supply to the dishwasher. Make sure that the water supply valve is open and that there is no blockage in the supply line.
Check the dishwasher filters. If the filters are clogged, they can cause the dishwasher to malfunction. Clean or replace the filters as needed.
If these steps do not resolve the issue, it may be necessary to call a professional appliance repair technician for further assistance.
12/25/2022 8:24:27 PM •
Dishwashers
•
Answered
on Dec 25, 2022
Re: My Polo Dishwasher DW6S- Elite 2 Dishwasher
I"M NOT AN EXPERT but .. can you run it through another wash cycle and try again.. otherwise unplug it and that should release the door lock .. again this is not my profession .. these are just my thoughts
12/13/2022 5:08:58 PM •
Dishwashers
•
Answered
on Dec 13, 2022
I put the rinse aid, but it does not show on the indicator that there is rinse aid
Please try these steps.
- Open the door completely and remove the rinse aid cap by turning it counterclockwise.
- Add the liquid rinse aid into the dispenser (until the rinse aid level reaches the full mark.)
- Close the rinse aid cap by rotating it clockwise.
- Set the rinse aid indicator dial to a number between 1 and 6. ...
- Replace the cover.
12/8/2022 3:35:18 PM •
Dishwashers
•
Answered
on Dec 08, 2022
Not finding what you are looking for?