20 Most Recent
Euro-Pro Shark GI490 Iron - Page 4 Questions & Answers
My balljoint cord is loose & the iron keeps shutting
Unless you are really good with miniature parts and can have the patience to open and repair, I suggest you buy a replacement cord/socket assembly. it should still be available, afterall it is a common problem. Just about any appliance repait place will do this for you , or yiu can order the assembly and do it yourself. Good -luck,Macgivor
Hey there,
Please guide me for
The advice given here is totally incorrect. Please ignore Azraelsrl solution. Being incorrect makes it very dangerous!!!
Blue or black = Neutral
red or brown = phase
green or green/yellow = earth.
If in doubt, you should get a qualified electrician to replace the cord to your iron. Getting it wrong... can easily kill someone!!!
regards
robotek
Iron has stopped heating
Check the power connection, the power cord to the heating coil. If there is no suppy then check the bimetal contact of the temperature setting switch, if voltage comes to coil without heating, the coil can be open .
You will have to use a multimeter in Ohms range to check the continuity of the coil.
Have to decide is coil is open about the cost of coil to that of a new iron.
Not finding what you are looking for?