Top 20 Epic A17R Recumbent Exercise Bike Questions & Answers

https://thefitnessview.com/how-to-disassemble-an-epic-t60-treadmill/ https://www.treadmill.run/disassemble-a-treadmill/

Here are a few things you can try to troubleshoot the issue:

1. Check the power supply and make sure that the treadmill is plugged in and receiving power.
2. Check the fuse or circuit breaker to make sure that the treadmill is not tripping any electrical circuits.
3. Make sure that the motor and controller are properly connected and functioning correctly. You may want to check the wiring and make sure there are no loose or damaged connections.

Question edited. Wrong type of peddle/pedal :>) See if you can get in behind the monitor and look for a fuse on the motherboard to it. The manual gives a bit of routine maintenance information and it does has a full parts schematic with contact to Icon Health and Fitness, the distributor for spares. https://www.manualslib.com/manual/568149/Epic-420-R-Bike.html?page=17 https://www.google.com/search?q=troubleshoot+and+repair+monitor+on+EPIC+420R ..

This appears to be a Treadmill rather than a Tablet / eReader? Category moved to Epic Treadmill. It appears to be a known issue and there are various fixes including reinstalling the Android Operating System for the display. https://www.google.com/search?q=epic+a35t+reset ..

The white line across the screen typically indicates that a row of led pixels is dead. If this is true, you cannot repair it. The only solution is to replace the screen. Try different screens and see if it remains. If so, that is the most probable cause.

https://askyourfitnessquestion.com/question/how-to-reset-nordictrack-treadmill/

First off remove the errant object.

If you wish to get some details; check the site linked here. http://electro-medical.blogspot.com/

Check the speed sensor an its positioning. If its ok then the motor or the motor control board is faulty. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts... http://electro-medical.blogspot.com/

If you wish to get some details about treadmill repair ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/

read number two here http://www.dickssportinggoods.com/product/index.jsp?productId=13025725 EPIC A30T Treadmill

The model # is on the bottom frame member. It begins with EPTL. With that # you will be able to order parts.

Bad touch panel.That's why some work and others dont If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

RUN the software calibration for easy diagnostic and fix it.Go to the HOOD cover motor, and follow the steps , or use the owner manual for follow the steps.God bless you

Lube the Deck belt see the video attached. +LUBE too the rollers bearing front+back very well.This happen because the system protect the electronic system2) if the problem persist after you lube, you must test the input voltage for motor, if there are the Motor is faulty. see my personal TIPS3) test the output of the control board, for input to motor, if there are NOT the board is faulty.

see the video attached, lube the rollers bearing front+ back very well.2) the input voltage motor, if there are the motor is fault, see my pesonal TIPS.3) test the output of control board for input motor, if there are NOT voltage input for motor, the board is faulty.God bless you

please RUN the software calibration inmediately, for easy diagnose and fix it. However adjust the speed sensor, clean it, test for open or fraulty, tight the connector very well.God bless you