Maytag MLE24PDAYW Dryer Commercial Dryer - Stack, Electric, Microprocessor Controls" - Answered Questions & Fixed issues
Where is the pilot light on a Maytag dryer
what is the model number? free standing pilots have been gone for several years. Google your model number and include parts.
This will give you sites that sell parts.
You most likely have and hot surface ignitor.
1/12/2024 3:57:12 PM •
Maytag Dryers
•
Answered
on Jan 12, 2024
•
24 views
What is the electrical capacity of Maytag MDG9700BWW?
https://search.yahoo.com/search?fr=mcafee&type=E210US1494G0&p=the+electrical+capacity+of+Maytag+MDG9700BWW%3F
Then check related searches
MOTOR: 1/4HP,120 volt,60 Hz,single-phase,thermally protected against overload,auto-reset. EXHAUST:Use a minimum of 4"(10.2 cm) diameter rigid aluminum or galvanized steel duct. Never use plastic,nonmetal or combustible duct. HEAT SOURCE/ELECTRICAL REQUIREMENTS: Electric model- 5,300 watt nichrome helix coil; 240 volt,AC,60 Hz; 30 amp fuse. Gas model-Single port burner with automatic electric ignition; 22,000 BTU/hr. 15 amp fuse. Self-adjusting valve automatically compensates for variation in gas pressure. WEIGHTS (Crated/Uncrated):
12/17/2023 1:41:53 AM •
Maytag Dryers
•
Answered
on Dec 17, 2023
•
23 views
What dose it mean F07 Maytag dryer
The F70 indicates a communication error code between the main control on the top left and the user interface on the front. Unplug the machine and remove the top. Check the connection on the board in the white plastic housing on the top left. Next check the connections on the board on the front.
12/4/2023 9:19:04 PM •
Maytag Dryers
•
Answered
on Dec 04, 2023
•
34 views
Maytag Stove Model MER5730AAA ... Baking element stays on. (Relay Board?)
If the baking element stays on even when the oven is turned off or when it's set to a different temperature, the issue might be with the relay board. The relay board is responsible for sending power to the bake element when it's supposed to be on, and cutting off power when it's supposed to be off.
To confirm if the relay board is the culprit, you can try the following:
- Turn off the power to the oven at the circuit breaker.
- Remove the back panel of the oven to access the relay board.
- Look for any signs of damage or burning on the board.
- Inspect the connections and wiring for any signs of damage or burning.
- Use a multimeter to test for continuity across the contacts of the relay board that control the bake element.
- If the continuity is present when the oven is turned off, or if the board is visibly damaged or burnt, then it's likely that the relay board needs to be replaced.
If the relay board is determined to be the issue, it's recommended to have a qualified technician replace it as working with electrical components can be dangerous.
3/2/2023 10:51:18 PM •
Maytag Dryers
•
Answered
on Mar 02, 2023
•
48 views
MAYTAG NEPTUNE DC MOD# MCE8000AYW interior lights are not coming on.
If replacing the bulbs did not fix the issue, then it could be a connection issue or a faulty light switch. You can try checking the connections to the light switch and the light assembly to make sure they are secure and properly connected. You can also use a multimeter to test the switch and see if it is functioning properly. If the switch is faulty, it will need to be replaced. If you are not comfortable doing this yourself, it is best to consult a professional technician.
2/25/2023 1:17:04 PM •
Maytag Dryers
•
Answered
on Feb 25, 2023
•
31 views
Maytag MDE4658AYW electric running hot on all settings, even on air fluff
If your Maytag MDE4658AYW electric dryer is running hot on all settings, even on air fluff, it is likely that the heating element is not working properly. Make sure that the heating element is securely connected to the dryer and that the power switch is in the "on" position. If the problem persists, you may need to replace the heating element or contact the manufacturer for assistance.
1/29/2023 7:18:58 AM •
Maytag Dryers
•
Answered
on Jan 29, 2023
•
72 views
Maytag sdg515daww cu ft / specs
I'm sorry but I'm unable to find the cubic feet size of Maytag dryer model SDG515DAWW. However, you may be able to find this information on the Maytag website, in the product manual, or by contacting Maytag customer service. Additionally, you can measure the interior dimensions of the dryer to estimate the cubic footage. The interior width, depth, and height measurements, when multiplied together, will give you an estimate of the cubic footage.
1/24/2023 7:50:54 AM •
Maytag Dryers
•
Answered
on Jan 24, 2023
•
108 views
Our mdg75pnhvw28 is giving a "rotation fault" after having changed the lower belt. Can't find a service manual to troubleshoot. Any suggestions?
I'm sorry, but I'm unable to provide specific troubleshooting advice for your mdg75pnhvw28 without more information about the device and the context in which the "rotation fault" is occurring.
Without a service manual or additional information about the device and its components, it's difficult for me to identify the root cause of the issue or suggest potential solutions.
In general, when troubleshooting a device that is experiencing a problem, it can be helpful to gather as much information as possible about the device and the circumstances surrounding the issue. This can include the make and model of the device, any error messages or codes that are displayed, and any recent changes or events that may have preceded the problem.
If you have access to a service manual or other technical documentation for the device, that can be a valuable resource for identifying potential causes and solutions for the problem. If you do not have access to a service manual, you may be able to find one online or by contacting the manufacturer or a qualified repair technician.
I recommend seeking the assistance of a qualified repair technician or the manufacturer if you are unable to identify the cause of the problem and do not have access to a service manual. A repair technician will have the necessary knowledge, tools, and experience to diagnose and repair the issue with your device.
12/27/2022 10:18:17 PM •
Maytag Dryers
•
Answered
on Dec 27, 2022
•
32 views
Not finding what you are looking for?