20 Most Recent
Quinny Buzz Three Wheel Stroller - Page 9 Questions & Answers
Back wheels keep deflating
hi, the chances are you have a puncture os something sharp sticking into the inner tube inside the tyre, what you need to do is buy a puncture repair kit then using the repair kit you take the tyre off the wheel then take the inner tube out.
now blow the inner tube up and place it in bowl of water and you should see bubbles coming off the inner tube, mark this with pen when dry so you know where the whole is, now use the puncture kit and place a patch over the whole, you can buy glue type patches or stick on patches without glue, you peel the back off the patch and put glue on or stick it over the whole if its a stick on patch and not glue.
then whilst this dry run your fingers around the inside of the tyre and check for any thorns or something sharp sticking in the tyre if you feel anything remove it and you should be ok, then when glue dry put the inner tube back in tyre and fit the tyre back on wheel now when you pump it up it shouldnt go back down unless you get another puncture.
if you are unsure what you are doing then taking your stroller into any bike shop and ask them to repair the punctures for you and they will do this for you whilst you wait.
The tire in the back left is continuously flat.
I'd check the inside the rims, there must be something rubbing against the tube. There is a product bike shops sell that is basically a solid foam inner tube. Check out your local bike shop
How do i put on the next size seat?
I had the very same problem and didn't have any instructions. It'sactually really easy to remove one and fit the other, it only took meabout 10 minutes to do the whole thing once I knew what to do. Thememory foam seat just slides out of the frame and the new seat slideson, however it's really not very easy to explain how to do it. The seatfabrics have sort of sturdy piping along the outer edges of the fabric,and this is what slides into the inside of the metal frame. The backpart of the seat unit does not come out (the sturdy part which has thelabel on) just the actual memory foam. The best thing to do is tocontact Dorel http://www.dorel.co.uk/contact-us/ or phone them on 01842763281 (they are very helpful) and they will email you the instructionin picture form - much easier that reading how to do it. Hope thishelps.
How do i put breaks on
hi to put the brake on
if you look at the rear wheels there are 2
buttons. 1 next to each rear wheel
1 is red
1 is grey
you press the red 1 to stop
press the grey 1 to go
if you have further problems please let me
know as it may need adjusting
this is easily done by yourself
Can I but a buggy
hi yes you can the info is here (lascal buggy board)
http://www.buggyboard.info/page.php?buggy=237&page=maxi
I have the quinny buzz
hi this is a very easy fix have you searched the web for quinny buzz inner tubes? ebat has loads if you are in the uk
or it is a 12 inch bent valve inner tube my advice is when you have repaired these put in tyre slime
this will help any future punctures by repairing them immediatley and you wont even know
very good stuff had it in mine and never had to pump them up good for any inflatable tyres with an
inner tube
How do you adjust the
hi i think this video will answer both your questions if not please leave a comment and i will help out further
http://www.youtube.com/watch?v=LijugaF1nFA
this is from dorel quinny
I am looking for a replacement handle for a
hi here is quinny contact info it is at the bottom of the page my advice is to contact them first to give you there price so you know if you are getting a good deal used or new
http://www.which.co.uk/baby-and-child/baby-transport/reviews-ns/top-buggy-brands/quinny-pushchairs/
i will also keep looking
I dont know how to
hi
this is the buzz manual you need pages 4 and 5
http://www.quinny.com/media/producthandleidingen/Quinny/manual_buzz3_2010-1.pdf
How do you fold a quinny buzz pushchair
here's the instruction manual
http://www.quinny.com/media/producthandleidingen/Quinny/manual_buzz3_2010-1.pdf
and video
http://www.youtube.com/watch?v=-3niAfNKed8
How to take front wheel off for quinny buzz3?
hi
if you look just above where the black part of the wheel joins the frame you will find 2 black dots on the frame itself push the into the frame and pull the wheel out these can be stiff but it will come out
The tyre on with the
hi
have you tried adjusting the cable the buzz brake has a cable running to either side and they can stretch over time it should a some silver bolt adjuster on the cable try twisting them slightly but first try a lubricating spray oil like wd40 they may just be stuck a little
How do i fit the footmuff on my quinny buzz pram?
Hi, to fit the footmuff, you need to undo the straps which can be done right at the top shoulder bit. Once this done you then thread the harness through the side holes on each side of the footmuff, then through the top hole & re-attatch harness to pushchair. All that is left to do it push the **** strap though the bottom of the footmuff. Hope this is of help to you. Regards Marie
How do I put on
Hi,
If you undo the shoulder pads, there is a clip to undo the strap, then you can slide this through the sleeping bag slits.
Hope this helps.
Not finding what you are looking for?