20 Most Recent Motorola Mobility H710 Bluetooth Headset - Page 2 Questions & Answers

I suggest you use plyers to open it. I hope I helped! :D

If you have not connected to a device before the passcode should be 0000

I have the exact same problem with my Motorola H710 Bluetooth Headset. When I charge the headset a green light is displayed. After the charge is complete I unplug the headset and NO light is displayed. I flip open the boom and NO light is displayed. I hold the call button for 10 secs or 10 mins or 10 hours and NO light is displayed. There is suppose to be a blue light displayed to indicate that the headset is ON. Since there is NO light displaying that means the headset is OFF. So my headset DOES NOT TURN ON! I did my research no where online can anyone give a solution. All the above solutions given does not help because the blue light DOES NOT turn on. No user guide or customer service rep or tech support can help that is what I found out. So I guess I will toss my headset in the garbage!

if you didn't pair your phone up yet, that could be why. Hold all 3 buttons down for 10 sec. should go solid blue, then pair your phone cause its in discovery.

its 0000 and this is the manual for it https://motorola-global-portal.custhelp.com/ci/fattach/get/593384/1361470855/redirect/1/session/L2F2LzEvdGltZS8xMzc5NTcxNTg0L3NpZC9nVDh4b0hBbA==/filename/H710_QSG.pdf

your need to hold the button on the side then if no button or doesnt work it means false wire or needed battry

Hi,

Welcome to Fixya. The reason why the other line can not hear you is just because your in MUTE mode. In order for them to hear you speaking on the other line, you have to unmute your call. To do that, you just have to tap both volume control until you hear the mute tone.

Please let me know if you have any questions.

Thank you for using Fixya,
seancarlisle

If the new battery is not holding a charge, then you may have ended up with a defective one. Best bet is to exchange with another. Be sure and buy from reputable place though. Individuals will sometimes sell their old stuff on eBay, and due to lack of handling, show no signs of wear.

do not turn it on or charge it until it is completely dry. Put the device into a bag of, say uncooked rice or spaghetti, as they will help **** the water out. Afterwards, let the device charge for a full night. If the circuits are shorted however, you are going to have to take it out to fix. Hope it turns out well.