Motorola Mobility H710 Bluetooth Headset - Answered Questions & Fixed issues

The normal passcode is 0000

Hi Wahab Williams, Have you tried a different charger? Please try a reset, press and hold the power button for 10 seconds. Best regards Suny Motorola Support

Delois On touch screen phones long press the device and a popup to remove should appear. Mark Motorola Support

Joe If the battery is depleted it will turn off. It may be expended. Rechargeable batteries cannot be recharged forever. Mark Motorola Support

Close mic boom and then try to charge. Mark Motorola Support

H710 isn't A2DP compatible so you can't listen to music. mark Motorola Support

Check out https://motorola-global-en-uk.custhelp.com/app/answers/prod_answer_detail/a_id/91862 Mark Motorola Support

I would charge it overnight. Mark Motorola Support

It is a multi-function button and has multiple uses. Please check the manual here: https://motorola-global-en-uk.custhelp.com/ci/fattach/get/545008/1353538144/redirect/1/filename/H710_GB_EN_QSG.pdf Mark Motorola Support

Sounds like you have a problem with your microphone. Please contact us. Mark Motorola Support CONTACT US

Irene- Yes it may not be salvageable. Electronics and water do not mix. Mark Motorola Support

You can try to delete the H710 out of your HTC's history. Then power the phone off and on again. Then go back through the pairing process to see if it improves. You can also try to reset the headset.

I suggest you use plyers to open it. I hope I helped! :D

If you have not connected to a device before the passcode should be 0000

if you didn't pair your phone up yet, that could be why. Hold all 3 buttons down for 10 sec. should go solid blue, then pair your phone cause its in discovery.

its 0000 and this is the manual for it https://motorola-global-portal.custhelp.com/ci/fattach/get/593384/1361470855/redirect/1/session/L2F2LzEvdGltZS8xMzc5NTcxNTg0L3NpZC9nVDh4b0hBbA==/filename/H710_QSG.pdf

I have the exact same problem with my Motorola H710 Bluetooth Headset. When I charge the headset a green light is displayed. After the charge is complete I unplug the headset and NO light is displayed. I flip open the boom and NO light is displayed. I hold the call button for 10 secs or 10 mins or 10 hours and NO light is displayed. There is suppose to be a blue light displayed to indicate that the headset is ON. Since there is NO light displaying that means the headset is OFF. So my headset DOES NOT TURN ON! I did my research no where online can anyone give a solution. All the above solutions given does not help because the blue light DOES NOT turn on. No user guide or customer service rep or tech support can help that is what I found out. So I guess I will toss my headset in the garbage!

your need to hold the button on the side then if no button or doesnt work it means false wire or needed battry

If the new battery is not holding a charge, then you may have ended up with a defective one. Best bet is to exchange with another. Be sure and buy from reputable place though. Individuals will sometimes sell their old stuff on eBay, and due to lack of handling, show no signs of wear.

do not turn it on or charge it until it is completely dry. Put the device into a bag of, say uncooked rice or spaghetti, as they will help **** the water out. Afterwards, let the device charge for a full night. If the circuits are shorted however, you are going to have to take it out to fix. Hope it turns out well.