Top 20
Sony Bravia KDL-46V4100 46 in. LCD HDTV Questions & Answers
My Sony Bravia tv screen
Hi there,
If you haven't done so already, check that the cable between your tv and digital cable box(probably HDMI) is secure at both ends. If it is, try a different cable and/or different port on your tv if you have more than one. If the issue is still there after you've tried these options it's most likely an issue with either the digital box or tv. I would contact manufacturer at this stage for advise and possible replacement of tv or box if they are under warranty.
Hope this helps.
12/30/2017 8:39:03 AM •
Sony Bravia...
•
2,097 views • 0 helpful votes
Scrambled LCD tv picture
I would think its a T-con bard fault its the main board for the screen over time they ware out from heat. this control the picture for the screen. they can go in many ways, black screen mixed or shadows even star screen and scramble type screen. and white lines and even half working only.
Sony kdl-46v4100 red light blinks 6 times please help
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
How do I get Netflix on my Sony tv
You used to be able to stream Netflix on this model with the Bravia Internet Video feature. (BIV) Unfortunately this feature is no longer supported. In order to get your Netflix now, you will need a Roku box or a Netflix thumb drive (fire stick). I hope this helps.
Forget pin code
On the back of the TV on the bottom left hand side, there is a small black sticker just about 2 cm square. It gives the Model Number, the S/N and the P/N (PIN). If thats no help then you can go to Sony website and get support:
http://www.sony.com/
Hope this helped, God Bless and Merry Christmas Tim
Green led in ON but red led in blinking,after so many blinks of red led the both lights ,red and green,gone off.
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
My tv looses sound every so often.
Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
Lcd tv not powering on
HI,
Probable power supply board is faulty. Some times in power surge the mov (high voltage protection device ) will get short and blew fuse to protect further damages. Chekc is the mov in the input stage is short or not .
MOV
www.electro-medical.blogspot.com
I have a 46" Sony Bravia TV that has colored verticle lines about 2-3" wide just left of center.
Hi,
Yor tv have problem with T con board. T con board is one which drives the pixels of the LCD panel. If any of the driver satge in the T con board is faulty then this problem can occur.
Some times bad contacts on the connections of the t con board can cause same problem. Remove the tv and find out the t con bard. Remove the connections to it and the reconnect the connections. Then check, if the problem remains the same then the tv need a new T con board.
You have didn't mentaioned any model number of your tv. So it is not possible to show you exactly how T con board looks.
Normally in all lcd tvs the tcon board is place on the bottom or top middile position. Which will be cover with metal cover or aluminium foil.
Here I have added a link which will lead you to the picture of T con board for toshiba.( Not exact one)
T con
http://electro-medical.blogspot.in/
Not finding what you are looking for?