20 Most Recent
Samsung LN32A330 32 in. LCD TV - Page 6 Questions & Answers
My 32 inch lcd tv green line in panel
Try unplugging as suggested. Also, try different inputs (HDMI, component, etc.) and different cables to be sure it's not some external item causing problems or just one input. Also plug it into an outlet on a different circuit in your house.If everything you try still shows the lines, it's probably the screen itself and is too expensive to fix.
My samsung model ln32a330j1d tv will not turn on.
I have the same TV and just fixed it in a couple mins. The problem is capacitor # CM861 on your power supply board. It is a 10v, 2200uF capacitor. You can tell it is bad because the top is rounded not flat like the others.
No picture just snow on screen
from what you are saying the screen driver has gone as long as there is sound it is just the screen driver board on the back of the screen if you peplace it the tv should be fine again, there are alot of replacement parts on the bay.
Can't access plug and play menu
On my 46 inch Samsung its was only accessible when you select TV input. I need to take the set out of the default store demo and put it into the home user mode. This did work for me.
Lcd too bright
If the brightness of the backlight cannot be decresed as desired, you have to enter its service mdoe option to adjust the minimum back ligh condition. But, this is a skilled work, and must ahve sound knowledge in electronics.
Visit the site named 'Electro-help' for more
details. Check this link and select the
site. View it in 'Flip card' option, which can be selected
from the drop down box menu at the left top corner or the display window. It
will make search easy.Service mode options and proceedings to more than 550 brands are described in detail there. Check it , and determine, whether can you do it by yourself or not. If you are not confident, seek support of any experienced service technician. There is no need to open the set to adjust this parameter.
Samsung LCD model #LN32A330JIDXZA has a very bright color, can hardly see the picture
My problem began the same way, then the tv turned off everytime I tried to turn it on. First I opened the tv, made a list of all the electrolithyc caps values and temps in the power board and gone to the store and bought all except the bigger one (like USD 8) changed all the caps and then the tv didnt turn off again but image was all white.Then searching in youtube found about the t-con board issues but the entire card was too expensive to dump so searched how to repair the t-con and found I can change the main chip so bought 2 in ebay from china took like one month but was just USD 8, so carefully cut all the old chip legs, retired the chip, used a soldering iron to retire the old legs, cleaned, put bits of new solder in the tracks, placed the new chip and began to paste leg by leg, tested continuity and checked for solder bridges between legs, assembled, turned on the tv and half screen has strips bot the left side was ok so rechecked flex cables between t-con and lcd and found bent tracks, carefully repositiones, assembled and now my mom has a brand new samsung 32in LCD to watch CSI and stuff... Sooo F_ck u Samsung LOLHope you can repair yours, every problem is a world so may not work for you but for USD 8 in chips, patience and some pulse soldering i think it worth the try.
Not finding what you are looking for?