20 Most Recent
Samsung LN32A330 32 in. LCD TV - Page 8 Questions & Answers
Tv wont turn on
samsung have a lot of problems with the caps in the power supply have it checked or if you know how check the power supply your self the caps keep a charge on them so be careful or you could could get shocked
Grainy
First thing to do is look to see if same issue when a DVD or Blu Ray is played via the rear audio and video inputs.this will narrow down what and where the problem is at.
Wont turn on
The power supply board has been defected. Replace it with a new one.
RIGHT SIDE VERTICAL WHITE BAR IN PICTURE
LCD set if white either communication issue from main to panel or a board that drives that side of screen (inverter possible but not real likely)If you can get a schematic scope the digital board to the output and look for issues there--if white not likely the display panel but you never know....
No sound no picture
the problem on you tv is the power supply , if you take the back cover off and look at the power supply you would see 2 bad capacitor , the top of the capacitor are pop by replacing this capacitor it would fix your problem
How to emove the demo
Removing Your TV from Shop Mode or Store Demo Mode
First, confirm your TV is in Shop Mode or Store Demo Mode:
1. Press the INFO button on your remote control. A list of settings appears.
2. See if the Picture Mode setting is set to Shop Mode or Store Demo Mode.
There are three methods for removing your TV from Shop Mode or Store Demo Mode. If the first method does not work, try the second or third method.
Method 1
To remove your TV from Shop Mode or Store Demo Mode, follow these steps:
1. Press the Volume button on the side panel of your TV. If your TV does not have a side panel, press the Volume button on the front panel. The TV displays the volume bar.
2. Press the Menu button on the side panel of your TV for about seven seconds. Again, if your TV does not have a side panel, press the Menu button on the front panel. If Dynamic or Dynamic Mode is displayed on the screen, your TV has been removed from Shop Mode or Store Demo Mode.
Note: You may want to press the INFO button on your remote again to confirm you TV is no longer in Shop Mode or Store Demo Mode.
Method 2
1. Press the Volume button on your remote. The TV displays the volume bar.
2. Press the Menu button on the side panel of your TV for about seven seconds. Again, if your TV does not have a side panel, press the Menu button on the front panel. If Dynamic or Dynamic Mode is displayed on the screen, your TV has been removed from Shop Mode or Store Demo Mode.
Note: You may want to press the INFO button on your remote again to confirm you TV is no longer in Shop Mode or Store Demo Mode.
Method 3
1. Press and hold the Volume button on your TV. The TV displays the volume bar.
2. As you are holding the Volume button, press the Menu button on the side panel of your TV for about seven seconds. Again, if your TV does not have a side panel, press the Menu button on the front panel. If Dynamic or Dynamic Mode is displayed on the screen, your TV has been removed from Shop Mode or Store Demo Mode.
Note: You may want to press the INFO button on your remote again to confirm you TV is no longer in Shop Mode or Store Demo Mode.
My Samsung LN32A330 will not turn on
G'Day!
Unfortunately, what you're describing is a repair
issue. You won't be able to address the problem with troubleshooting.
There is a part inside the TV that needs to be replaced. If you're
under warranty, this will cost you nothing. If you're not under
warranty the cost will likely be a minimum of $200 parts and labor.
However, be warned that the cost could be considerably higher.
I hope I've provided you useful assistance and that this information
allows you to make an informed decision as to how to proceed from
here. Please be sure to vote on my response. I hope I've earned a
good rating from you today.
Please post a comment if you need
additional assistance so that I can help you further.
My samsung tv, will not turn
There a number of possible causes. First, Do you see a RED led on the tv. If you do then you might have a bad Main bdor a stuck button on the tv (Not the remote) and if you you do not see the RED led is "on" then you have a bad Power Supply.
Picture is lighter and not as sharp
possibly your t-con board is getting defective. The t-con board is what transfers your image from the signal board to the LCD screen. You can get parts for this tv at www.interliquidparts.com
Not finding what you are looking for?