20 Most Recent
Canon Pixma iP2600 Photo InkJet Printer - Page 11 Questions & Answers
The paper gets caught on
Hi
Thanks for using FixYa. First,
verify that there is actually no paper jam (open all the doors, take out the
paper tray, take out the cartridges and visually inspect). Turn printer off and
unplug the printer from all cables (power, USB, etc). Try to hold it upside
down and gently shake it so that if there is any paper inside it’s removed. If still
it’s not resolved then clean the print head. To clean the print head take a hot
water towel with the printer unplugged and the cartridges out, clean it till the
time you see there is no ink residue on the towel. If still the issue is not resolved then you'll need to get it replaced. Please do accept the solution if the issue is
resolved or else revert for further assistance.
Thanks
Rylee
I have lost my disk to install my canon ip2600
I can't give you the direct link for drivers as you haven't stated your country but you should get them from here.
http://search2.jp.canon.com/search/canon/search.x?tmpl=en&ie=ISO-8859-1&target=t&q=ip2600+printer&submit.x=19&submit.y=14&submit=Search
What does the error code 5100 for my Ip2600 canon
Try
Solution 1:
Clean the timing strip.
Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .
Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.
All Best: Pineworks
Printer won't read my refilled cartridge for my
many moidern printers are fitted with programs that are abkle to identify and refuse refillwd cartridges.
The sloutioni snot to allow it to go emty, before refilling.
Tro go to the web page of te manufacturer of the refiller, or probably thechain store that refilled the cartridge,.
They usually hav ethe speps to take to reset the cartridge error.
for the time being Try unplugging the printer, then power it on while it isunplugged.
then let it sit overnight. plug it in and see if it will reset.
I have a canon IP2600 printer only 4 months old
In many cases, forcing (pulling out) the jammed paper in the printer might caused severe damages on the gears or some parts on the mechanical stability.
Noise problem might occurred if some of the joints (parts) were dis-aligned. Dis-assemble carefully the printer, and look for that damage. Put some grease and assemble.
How do I reset the inkjet monitor after I install
You mean reset the printer itself, You have to use your "OPTIONS MENU BUTTONS"!!!! ("select" and "arrow", etc buttons to navigate on your options screen), it will want to print a test page once you put new ink cartrages in and close the door.....
Ink cartridge refill
You can't refill these cartridges yourself. Sure you can get ink and inject it in, but your printer remembers the serial number of each cartridge and how many pages you've printed with it. Because it remembers this information it turns off the cartridge electronics to prevent the use of refills. I would try to get refills for the black but not the color cartridge. I own a Cartridge World ink refilling store and we have a high return rate on the color cartridges. It seems the printers are extremely finicky about color refills. If you get a black refill and your printer won't print with it, exchange it for another one because you happened to get a cartridge with the same serial number as the last one you had. I recommend Cartridge World refills, then Office Depot brand refills.
Changing cartridges
1) With the power on, open the front cover. The print head should move to the center.
2) Prepare the new cartridge for installation by removing the tape(s). Do not touch the area of the ink cartridge that was protected by the tapes.
3) Insert color cartridge into the right slot, then the black into the left slot. Push up and in until the cartridge clicks into place.
4) Close the front cover. Wait until the printer finishes preparing the new cartridge(s).
I can not get my printer to work with just the
- Select 'Print' on the File menu of your application to open the Print dialog box.
- Select your printer model name and click 'Preferences' (or 'Properties'). The printer driver setup window appears.
- On the Maintenance tab, click the 'Ink Cartridge Settings' icon.
On the Ink Cartridge Settings window, check the 'Ink Cartridge' drop-down > Select "Black Only"
Canon recommends that you leave the cartridges in the printer even though you may only be using black.
I dont know how to refill my canon ip2600 ink
Problem is resetting the IC chip that they install that calculates that your cartridge is empty, Refilling it doesn't work because the chip tells the printer that it'S empty. No way to reset it yet.
I'm not sure of the correct paper size for my printer
The size of paper available to the printer and the size of paper in your software must match. If your document is formatted for 8.5 x 11 plain paper, that's what you should use.
If your document, in your software is set up for a different size of paper, you should only put paper of that specific size into the tray.
Not finding what you are looking for?