20 Most Recent Canon Pixma iP2600 Photo InkJet Printer - Page 9 Questions & Answers


go to here and watch the video

http://www.youtube.com/watch?v=H7nPJ2X3bio

Canon Pixma... | Answered on Sep 04, 2010


u can download at http://www.ziddu.com/download/11446869/IPTool_1.1.5.rar.html or at http://resetterprogram.blogspot.com

Canon Pixma... | Answered on Aug 30, 2010


No problem.
Just go to the canon website, choose your operating system version and you will be presented with downloadable drivers and software. Download, install and you are good :)
Link to your model's support page:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip2600#DriversAndSoftware
Please come back and rate my solution if helped.

Canon Pixma... | Answered on Aug 10, 2010


the ink asborber is full how do i clean this

Canon Pixma... | Answered on Jul 17, 2010


I have just replaced my both catridges in the printer the first one two weeks ago and then it still said that I had to replace it but I ignored it then the coloured one wanted replacing and I replace it but then it would not allow me to print at all and I noticed that the orange light would not stop flashing I have checked that the cartridges are correctively put in.

Please can you help.

Mrs Cheryl Lockyer
15 Bannister House
Little Chart
Ashford
Kent
TN27 0QF

Canon Pixma... | Answered on Jul 07, 2010


I have found over the years that printers really don't lie. If it says there is a paper jam there usually is. I have completely taken apart a large laserjet printer to find a very tiny piece of paper causing the problem. Also if you run sticky labels through printers they have a tendency to leave residue or even part of a label behind which will cause the printer to tell you there is a jam. Check your printer very carefully, use some canned air to blow it out. You may need a printer repair person to come out and take it apart to look for possible stuck paper.

Canon Pixma... | Answered on Jul 05, 2010


Please follow the link below verbatim. Keep the CD of drivers etc that came with the printer handy.
Installing Devices on PCs and Laptops

Canon Pixma... | Answered on Jun 07, 2010


cannon 2600 printer will not feed the paper through

Canon Pixma... | Answered on May 31, 2010


How to install or remove ink cartridges To print normally, install or remove ink cartridges in an orderly procedure.

How to install ink cartridges

1. After confirming that the printer is powered on, open the front cover. The ink cartridge holder moves to the replacement position.

2. Take out an new cartridge from its casing and gently remove the orange protective tape in the direction of an arrow.
ip1600takeofforangetape.jpg
Caution: Do not attempt to reattach the protective tape once you have removed it. Do not touch the gold electrical contacts or the print head after removing the protective tape.

cartthingsnottotouch.jpg
3. Insert the color cartridge into the right slot and then the black cartridge into the left slot.
Note: Push up on the nearest side of the cartridge until it clicks into place.

ip1600puttinginink.gif
4. Confirm that the ink cartridges are installed properly.
confirminkinok.gif
(A) The ink cartridge is not installed properly.
(B) The ink cartridge is installed properly.


5. Close the front cover. Wait until the preparatory operation is complete; it takes about one to two minutes.

How to remove ink cartridges

1. After confirming that the printer is powered on, open the front cover. The ink cartridge holder moves to the replacement position.

2. Remove the ink cartridges.
Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.
ip1600takeinkout.gif





.

Good luck

Canon Pixma... | Answered on May 26, 2010


the answer is no, if you want black priting a good solution would be a laser jet, they go for very cheap these days. You cannot convert these things it will not work due to the module in the printer tht would deny it each time. From a manufacture standpoint I would rely on the no answer. Now I am not saying that there is NOT some geek out there that has not pulled it off. But I got to stay on a quality guidline.

Thanks

please do be considerate when passing threw fixya to leave a vote and some feedback on all answers you deem Quality. Thanks

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Canon Pixma... | Answered on May 24, 2010


my printer will not print out anything. it starts to but the paper never enters into the printer, it is almost like it is jamed but it isn't.

The message says there is an error, push resume and try again.. same thing, it starts to push paper thru.. acts like a jam.. same message.. but paper is not jammed

Canon Pixma... | Answered on May 19, 2010


Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Also clean The purge unit, called a spittoon assembly in an HP, Lexmark, Caonon and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing.

That is where you'll find the print head assembly parked on top of it.
It also has an electrical pump to milk the print heads and test for ink flow.

So clean all under where the heads are parked and on IP6600D models you can take out the heads just by clipping them out, and then clean well.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Canon Pixma... | Answered on May 16, 2010


Drivers and software available for download here.

Canon Pixma... | Answered on May 07, 2010


try driverguide.com
they have a huge library of drivers you can download for free

Canon Pixma... | Answered on May 01, 2010


Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Also clean The purge unit, called a spittoon assembly in an HP, Lexmark, Caonon and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing.

That is where you'll find the print head assembly parked on top of it.
It also has an electrical pump to milk the print heads and test for ink flow.

So clean all under where the heads are parked and on IP6600D models you can take out the heads just by clipping them out, and then clean well.




Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Canon Pixma... | Answered on Apr 25, 2010


Do you have the manual? If so, go to Cleaning the Printer and read Cleaning the Roller, make sure there are no foreign objects in the rear tray and try turning the printer Off then back On OR even a can of that compressed air to try blowing the inside of it out. If you don't have the manual you might find it online. I tried copying the Cleaning part but it wouldn't let me.

Canon Pixma... | Answered on Apr 21, 2010


hi....try check the usb cable that conect to your pc....is the cable is ok...or when you print any document try to choose the right printer...

Canon Pixma... | Answered on Apr 19, 2010

Not finding what you are looking for?
Canon Pixma iP2600 Photo InkJet Printer Logo

405 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2276 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PIXMA Canon

  • PIXMA Canon

Most Popular Question

canon ip 2600 printer paper not feed

  • Office Equipment & Supplies
Loading...