Top 20 LG Shine CU720 Cellular Phone Questions & Answers

just have to wait for the memory card to be ready..,and also the usb cable may be faulty or is not compatible to your phone.

Take it to your local retailer or cellular provider where you purchased it from. Make sure to bring your proof of purchase and they will reset it for you.

lg cu720 unlock

If you mean your home wifi network you can't. The shine is not wifi capable.

Hi, you can unlock it with the following service that provides factory unlock codes for your phone model: http://www.fastgsm.com/en/lg/lg/cu720-shine/unlock-code-usim-locked

the code will have come from the phone company and you will have to get a passcode.

Hello Dear friend:":defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will Solved

May be IMEI not MEID the code *#06# is to view IMEI for general.NB: IMEI meansI = InternationalM = MobileE = EquipmentI = IdentificationThanks for using FixYa!

GPRS needs configuration settings from your mobile service provider. This settings can be manually entered in the phone settings but to lessen then difficulties, all you have to do is call your mobile service provider. Once you received the settings/SMS from your service provider all you have to do is select save to save it. It might also require certain amount of credit before you can successfully use the GPRS connection on your phone. For this, you can discuss these requirements with them once you ask them for the settings.thank you for choosing www.fixya.com

hi you can use codes to unlock your lg cu720 mobile .you can purchase the codes from this site theunlockspot here they ask the country , and the network name to which your mobile is locked and finally they will send you the codes to unlock your mobile along with the instruction about how to enter the codes in your mobile.

Hi! Almost all phones have a setting that alouds you to set a wellcoming wallpaper or message when you restart the phone. It seems that you didn't set any of those and your phone let's you to know that you can change that if you want to. It is not a error or a serious problem, it is just a setting that you can change from the settings menu.
I hope that was useful! Have a nice day!

you can contact the mobile service provider.........

Try master reset code from service provider...they will give it...........

Hi,
Unfortunately this is not something that you can fix...the wiring broke to the screen of the back light went out on the screen... that will have to be professionally repaired..

Hopefully you have an extended warranty or insurance on the phone that will replace the phone for you...if not, you will need to buy a new phone...

heatman101

Go to service center . Thanks!

Take it to a repair shop as it is to delicate for you to try and repair yourself.

Sorry, but without sim card you cannot get out of emergence mode

Make sure you have downloaded latest QFG Module and also have LG drivers from support installed ...

1. Download U970 unlock file (in Lg3g Folder) and u970 NV file (in NVM Folder)
2. Hold 2+5+ON to put LG in download mode and connect to original SHINE USB cable (recommended to connect to PC USB slot NOT USB HUB to avoid errors) drivers will automatically install
3.Open QFG Module, SCAN FOR INTERFACE ... choose correct COM and choose job as FULL FLASH ... make sure FORCE MODE is ticked ... press DO JOB and locate u970.UNLOCK file ... press OK
4. Have a cuppa , it will take about 45min to FULL FLASH (FGOLD BOX will give warning message during FLASH, check phone is powered on - JUST LIGHT IS ON IT DOES NOT HAVE TO BE ON FULLY - and press OK if NOT follow instruction given on warning message and press OK)
5. After FLASH switch phone ON and RECONNECT to USB CABLE ... SCAN INTERFACE ... choose correct COM ... choose do job as NV WRITE ... make sure FORCE MODE is ticked ... press DO JOB and locate u970.NV file ... press OK
6. RECONNECT TO USB CABLE ... SCAN INTERFACE ... DIRECT UNLOCK ... OK

Enjoy your LG SHINE now it is UNLOCKED for any network and aslo has LG KU970 generic software in it no more of the 3G theme

http://www.gsmdoser.com/ is where you download the Flash Files

You can get the unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.