LG KG270 Cellular Phone - Answered Questions & Fixed issues

Dont worry i Can Help you on this .................

don't worry you can unlock your phone

you need unlock code
you can get unlock codes there are number of providers available

but this is some thing special very good service try this Click here

good luck

You are going to have to do a factory reset on it. You will lose all the stuff you had

You should have installed iKeyMonitor on your cell phone. https://ikeymonitor.com/

you may use this code- 1234
OR
if it doesnot work go to the nearest show room and get them unlock iy

```PLEASE RATE MY ANSWER AS GOOD AS POSSIBLE```

It seems that your new operator SIM card doesn't nave coverage at your area, that's why it's showing roaming because the SIM is using (registered) a host network, maybe if you make a manual search of the new SIM operator network, you could register it at its own network, if it's not found, you should report this issue to its customer service.

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
Default 6 Digit Security code: 000999 or 1122
Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

in your mobile you go to settings in there you will find master reset if click that it will ask security code you code then it will reset

HI,

To switch on the phone please press and hold the end call button for about 4 seconds it wil switch on.

Follow the same procedure for switching off also

For easy understanding i have attached you a image



Thanx

i lost my lmt code

i have in-ear speaker in kg270

i dont what is the pin code of lg kg270 mobile. plz send me master reset code of this mobile

try myxer or mytinyphone.com

this error message means that your cell phone cannot read or detect the SIM card. Either the phone is faulty or the SIM card is faulty. You need to take the phone and SIM card to your phone service provider to check your phone and SIM card.

The default lock code is 0000

yes you can have them replace the ribbon for your phone the light circuit on the ribbon is bad

when i on my mobilee it show a msg of "fail"
plz solve

asked my girlfriend

TRY 1234

on your service provider site enter with your no. and you can get puk code or visit costumer care ..

You have not mentioned any model number in specific for your phone, however you can use a memory card on the phone and set the memory card your storage device