Top 20
Kodak ESP 5 Printer Questions & Answers
My kodak hero 4.2 won't power up?
Hello, First check to see that the power plug has power. If it does then make sure the power cord and seated correctly into the back of the printer. Reseat the power cord and try the power switch. If that doesn't work, will have too replace the power cord. If that doesn't fix will have to take in for repair or call kodak tech support with model and serial number and walk thru trouble shooting.
How to a fix my Kodak ESP5 from the color printing dull instead of vibrant?
Hi there
You can try cleaning the head out of the machine with head cleaning solution, but that might not completely sort the problem the only other altrnative is to replace the print head. All printers must be left on and not switched off otherwise ink from printing builds up in the channels within the head and dries therefore the next time you print you get errors. If you go to any office after they have gone home, or look on films you will notice the computers are off but all the printers are on standby therefore reducing/eliminating this issue. If you only use your printer now and again, invest in a colour Laser printer as these dont have this issue. Alternatively if you need an all in one get a brother as the head is far easier to sort out. Mike D
Where is my document that i scanned to computer going?
Depending on what software you are using , But easy way is to search by typing in SEARCH FILE BOX. start menu , File name you gave to scan Doc. or even date you scan it. then they will all be listed.
But usually they are placed in the software package your scanner using or pictures , or Document file.
jeff
Scan document to PC
Make sure you have the kodak software installed and go to the "kodak AIO center" (download it if you don't have a disk) you should see an option to scan an image.
Won't scan to pc
try scanning at a low resolution. I had the same problem. this worked for me
Kodak 5210 all in one was working fine but all of
If you detect a burning smell, it's time to unplug the printer and replace it. Always unplug immediately whenever you have an electronic device with a burning smell as a matter of safety. As Kodak no longer makes inkjet printers, you will need to select another brand.Hope that helps,Bax
How to scan pictures to email
You cannot scan pictures directly to email.Scan the photo and save the photo as a JPG file.Open your email program, setup the email and address to your friend and then attach the scanned JPG file to this email before sending it.
Says paper jam, but there is no paper jam
->Clear any loose paper from the paper tray. This will help you
locate the jam. You will find it either in front, near the paper tray,
or in the rear.
->To clear a paper jam near the paper tray, grip the paper and pull
it firmly but gently from the printer. If you find a stack of papers
jammed, grab from the middle of the stack and pull.
->For a rear jam, remove the back of the printer. When you find a free edge on the paper, grip it firmly and pull it out.
->Replace the back cover. Press the "Resume" button or turn off the
printer, and then turn it back on. Your settings should reset.
->Try printing another documentIf you need any technical help on printer then you can reach at
http://www.vtechsquad.com/
No color
Go to support on the Kodak website. Enter your model number and click on downloads. Select driver and download it. The software will guide you through the installation. murf427
Blue color doesnt print
bip your print head in hot water for about 5 to 10 seconds. put it back into the printer without drying it. start printing immediately.
Not finding what you are looking for?