my pictures won't upload to my computer. ive uploaded them before so i dont understand the problem.i have a fuji z20fd.
My computer usually prompts me to uplaod photos when my camera is connected but it isn't doing that anymore. Why won't it upload my photos anymore?
Posted on Jul 12, 2011
i downloaded my pics to my computer, by putting the memory card into the harddrive. and when i went to put the memory card back into my camera. and it worked just fine. till i turned it on and tryed to take a pic. it said "protected card!" on the screed,.
HELP!
The memory card should have a little switch on it, try it in the other position. It is a safety lock to stop it getting wiped.
Posted on Feb 13, 2009
can i charge my camera using my usb cord on my pc?
No, the camera does not include any charging circuitry. Use the supplied battery charger instead.
Posted on Feb 10, 2010
Hi,
I've been having problems with the connection of my camera to the computer when i have to download the pictures.
I have tried connecting the flesh card ( 4GB), it doesn't accett it , tried connecting through the USB port, it shows this:
COMMUNICATION ERROR
What should i do ?
Thank you for your support
Anna
i had this problem for couple of days, until i started googling this problem. I started to reread this instruction manual. If you have a communication error on the camera screen. Make sure the the USB port you are using, is a working unit. If it is, more than likely the port is not inserted correctly. Keep fiddling around with it until the message goes away. I would also turn the camera on and off to double check and make sure.
Posted on Jan 05, 2009
when i turn my camera on there is a small yellow camera icon with an exclamation point beside it. Can you tell me what this is a code for?
That is a camera shake warning. Use a steady base to support the camera when taking the picture or use the flash.
Posted on Jul 09, 2010
When switching on I have a yellow camera icon on right hand side of screen with an exclamation mark to the left of camera icon. Is this a problem?! I used to have the 'easy Mode' set up but seem to have 'lost' that and can't get it back on the Menu.
In the setup menu, do you have an entry for "reset"? If so, try it.
Posted on Aug 30, 2009
Just purchased a CF II card for my fuji s602z. The camera keeps saying card not initialized. I've changed the settings to accept the CF card... still not working. I've tried two separate cards both brand new
I've bought a SanDisk ExtremeIII 4GB CFI card. Ofcourse, at the beginig nothing worked. Camera format command worked neither (initializing problem,...). I then formated my card through a car reader on fat16 and now everything works. Just make this command: format <volume>: /FS:FAT. After checking and formathing the card, you will be asked to go on by 64K size of cluster. say Yes.
Posted on Apr 02, 2010
It use to leave the time & dat on photo's. It doesn't do it anymore. I went back throught the setup and it still doesn't stamp the date & Time on the Prints. Fuji FinePix Z20fd
The date is printed on the photos using the "pict bridge" software. The date printing option is set on the computer, not the camera. If the printer has it disabled or it is a printer that doesn't support it, you won't get the date.
Posted on Jun 20, 2009
how do I download to my pc?
pdf user manual is available for free on Fujifilm site, http://www.fujifilm.com/products/digital_cameras/z/finepix_z20fd/pdf/index/finepix_z20fd_manual_01.pdf
You should either :
- connect your camera directly to the PC with provided USB cable, after recognition of the camera by the computer (may take some time), you will see the camera like a disk in the file explorer, and have two different folders representing internal memory and the removable memory card, just browse in the directorys and you will find the picture.
- or send the picture by infrared, see pages 56 of your user manual (probably not the simplest way, as the comuter may not accept infrared transmition).
- or use the cameras menu to transfer the pictures from internal memory to removable memory. You must enter picture displaying mode, the presse menu, you have an "copy" option to transfer between internal memory and memory card, see page 76 from user manual. Then you just get the card out and read it as you ever do.
Hope this will help.
Posted on Jun 22, 2009
how do I replace my LCD screen in my Finepix z20 camera?
You can find replacement LCD screens for Finepix Z20 in Pantallas.biz:
http://www.pantallas.biz
Posted on May 30, 2009
334 questions posted
Usually answered in minutes!
493 Questions
447 Questions
404 Questions
346 Questions
277 Questions