HP Pavilion TX2000Z Notebook - Answered Questions & Fixed issues
I have power to my
- Check your power cord & adapter.
If its working then check the battery, reseat the battery & check.
If available then check with another battery
If no, then remove the battery & switch on the PC in AC mode.
Check if battery charging indication or AC power on indication is glowing. if not then need to change ur motherboard.
If indication is OK, but could not power ON then check ur RAM for any loose connection or dust. clean & reinstall.
If still no display, connect an external monitor, check if display is comming.
If Display is coming then your LCD need to replace.
2/15/2014 1:22:44 PM •
HP Pavilion...
•
Answered
on Feb 15, 2014
•
1,043 views
HP tx2000 - black screen.
Hi
The problem you are experiencing is related to the screen of your Hp.
All you need to do is to is to get to a computer store and get your screen replaced.
You can not fix a damaged screen.
GOOD LUCK
5/2/2012 8:21:58 AM •
HP Pavilion...
•
Answered
on May 02, 2012
•
1,295 views
It shutdown suddenly
If Ur Laptop Shutdown While Working. Then First Check Out Your Bettery Life. If It is ok Then Make Sure Your Laptop Didn't Heat more.
If Still You Face Problem Then Contact Hp Care No : 1800 112267.
8/9/2011 10:19:16 AM •
HP Pavilion...
•
Answered
on Aug 09, 2011
•
174 views
This is what happen my wife click on the Fn an on
I am not familiar with the half moon, but most laptops allow you to hold down the function key (Fn) and tap either the F5 or F6 key and switch the output of the LCD from the screen out the D-shell RGB connector to a cable connected to another monitor such as your TV screen or a stand alone. I say F5 or F6 as it is different on different machines. Ordinarily if you hold down the Fn key and re-tap the half moon key it should reverse what your wife has done. The keys act as a toggle on then off.
3/29/2011 7:38:12 PM •
HP Pavilion...
•
Answered
on Mar 29, 2011
•
341 views
My hp tx2000 boot with
check bios and boot sequence first (F2 Whilst booting up)get to know these pages,dont change any values untill you are sure you know what your doing.Understand the "boot sequence".if you still have the error re-install operating system from external drive if necessaary
3/10/2011 8:42:57 PM •
HP Pavilion...
•
Answered
on Mar 10, 2011
•
332 views
When i switch on my
Hello, that sounds a motherboard graphic problem, try this befor you sen the laptop to fix :
1- take the battery and the power cable from the laptop
2- press and hold for 10 seconds the power button
3- connect only the power cable without the battery and try to boot.
if this dont help you need to repair the motherboard
Thanks
please rate this answer
1/25/2011 1:43:20 PM •
HP Pavilion...
•
Answered
on Jan 25, 2011
•
116 views
What can I do to fix my hp pavilion tx2000 because
You might have either a faulty LCD cable or screen inverter board.
The
LCD cable transfers data signal from the motherboard & video card
to the LCD screen. It also supplies high voltage DC power to the screen
inverter board. The screen inverter board works as a power supply for
the backlight lamp mounted inside the LCD screen. It converts low
voltage DC power to high voltage AC power needed for the backlight lamp.
9/15/2010 8:36:15 PM •
HP Pavilion...
•
Answered
on Sep 15, 2010
•
458 views
I plugged in my brand
clean ram banks and ram return back and check ... if same thing .. then u need to repairing vga card... thanks
9/14/2010 4:58:17 AM •
HP Pavilion...
•
Answered
on Sep 14, 2010
•
109 views
I have a hp pavilion tx2000 tablet pc. the four
You need to reinstall the drivers...I am not sure which model version you exactly have. But they are available on the website.
For example http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&product=3810250&
3/23/2010 3:45:45 AM •
HP Pavilion...
•
Answered
on Mar 23, 2010
•
257 views
BLANK SCREEN
? try removing the battery and then connect the adapter to turn on the computer
? if it is turning on then disconnect the cable and hold down the power button for 2 mins and try turning on the compute
3/13/2010 10:12:46 PM •
HP Pavilion...
•
Answered
on Mar 13, 2010
•
439 views
I have a HP Pavilion Entertainment tx2000, when i
Remove the adapter and battery. Hold on the power switch for one minute.Then connect the adapter and switch on the system. If it fails then replace the RAM with a good one. Also try an external monitor.If all these are failed, then it will be a motherboard issue. Contact a technician.
3/3/2010 12:08:32 PM •
HP Pavilion...
•
Answered
on Mar 03, 2010
•
182 views
Not finding what you are looking for?