20 Most Recent
Dewalt 12V XRP Battery Pack - Page 3 Questions & Answers
Remove the chuck dc970
I'm assuming you have a DCD970 as DeWalt doesn't have a DC970 and the DW970 is an impact driver. The chuck on your drill is a new design that doesn't have a lock screw inside the chuck, they are put on very tight with lock-tite to hold them on. They are made to be taken off with a special chuck holder and vice jig that only service centers have. The allen wrench method used on older chucks won't work as the chuck will just loosen when you hit the allen wrench. I have on occasion removed one by doing the following: Turn the chuck fully open then secure it in a vice with the drill straight up. Holding the drill body and using the handle for leverage, turn the drill counterclockwise, as you are looking down on it, with steady, strong pressure. If the chuck breaks free it will spin off easily. If you are at all afraid you may break the handle you may have to take or send it to a service center to have it removed.
Where can I find Serial number of Dewalt hummer drill
Most hammer drills on battery from brand Dewalt have its serial number in one of the yellow shell parts its a build code of the shells only under the battery holder also the year of build date stands there too it have the same function, I myself have long wondered too, because some Dewalt tools have a real serialnumber is it not fully clear why there is sometimes not and sometimes a full number to find, i have asked that also on Stanley Dewalt in Belgium. Ser 030942 on this picture but i know maybe you see a clear yellow line in black on the information sticker where you think there should be placed the number and they forget you will find no real number but always you can use the 2 3number code with year of build in one of both shells under batteryholder .
Not finding what you are looking for?