Fender CD140sce Acoustic Electric Guitar - Answered Questions & Fixed issues


http://www.guitardaterproject.org/fender.aspx

Fender CD140sce... | Answered on Nov 15, 2016 | 126 views


the battery is inside the sound hole take a mirror and look inside battery should be in a clip on the side of the module control

Fender CD140sce... | Answered on Aug 26, 2014 | 58 views


If the mixer is receiving signal, then the problem is pilot error at the mixer, not the guitar. You did not mention what type of mixer you have so I have no way of helping. Common problems would be failure to send the guitar channel to the mixing buss, leaving the channel muted... but we really need the mixer and model number to give more help that that.

Fender CD140sce... | Answered on Jul 19, 2011 | 108 views


It is a little tricky, but you have to kind of pre-form the ball end of the string so it tucks under the ledge of the hole it goes into. Then put peg in and as you do pull up on the string slightly so the pre-formed ball end is caught under the ledge. Make sure the slot is toward the neck direction and the string seats in it, Also once the string is seated, kind of preform the string over the edge of the hole as the string is started to be tightened.

Fender CD140sce... | Answered on May 28, 2011 | 136 views


Try this page:http://www.fender.com/products/search.php?partno=0962211021 Hope this helps. If not contact Fender at that site.

Fender CD140sce... | Answered on Jun 03, 2010 | 544 views


I'm an engineer, not a musician. The device is a frequency meter set up to display the musical note input to it. If you pluck a C flat and it shows an A you need to tune your instrument till it shows a C flat. You will have to refer to the manual for operation and modes.

Fender Music | Answered on Dec 04, 2019 | 31 views


yes check the fuse . there is generally a fuse for power switch and that sounds like what your having trouble with. hope that helps you out.

Fender Music | Answered on Sep 27, 2019 | 130 views


Does it still have a hum/buzz when NOTHING is plugged into the INPUT? If so, you MAY have a tub going bad. If the noise is only there when you have your guitar/effects, etc. plugged in, then the problem is the guitar grounding or effects faulty...
FIRST: When the amp is "cool", UNPLUG THE AMP POWER CORD FROM THE WALL! ! ! ! Then CAREFULLY remove and reseat the tubes one at a time. Be sure to insert back into the socket correctly. You MAY just have a bit of corrosion on the tube "pins"....

SECOND:Don't plug anything into the amp, turn on and warm up. GENTLY tap one tube at a time with a WOODEN pencil. DO NOT USE anything metallic (like a screwdriver....) and be VERY gentle. If the noise increases or decreases, you probably have a tube going bad...

That's all I have. If this doesn't cure the issue, best take it to a repair shop . . . .

Fender Music | Answered on Sep 27, 2019 | 138 views


While it is possible (probable) it is caused by the AC mains modulating the output due to a power supply fault, it could be caused by inadvertently creating a hum loop due to poor grounding - check out the link below...

https://www.google.com/search?q=hum+loop+audio&rlz=1C1CAFB_enGB673GB676&oq=hum+loop&aqs=chrome.4.69i57j0l5.8500j0j8&sourceid=chrome&ie=UTF-8

Fender Music | Answered on Sep 27, 2019 | 119 views


first checkout your cable
if you still have problem , change you pickup

Fender Music | Answered on Sep 27, 2019 | 105 views


bring to a music shop fixya doesnt do appraisals

Fender Music | Answered on Jul 01, 2019 | 73 views


The Fender Hot Rod Deluxe has been around since 1996

Fender Music | Answered on Apr 06, 2019 | 71 views


You have to get the volume pot cleaned and lubricated. If not a quick replacement should do.

Fender Music | Answered on Feb 11, 2019 | 112 views


You could buy a Lehle switch, or simply use one on each separately. If you are using a multieffect unit you could make a Y cable to take the output to both amps but that will not allow you to select the drive channel - you still need the Fender footswitch for that, one for each amp. Lehle is a German company and they make a lot of different footswitch combinations but you will pay for the convenience.


I recommend the Fender single button footswitch for this use - Type: Footswitch
  • Number of Footswitch Buttons: 1
  • Manufacturer Part Number: 0994052000
  • It's about $35.00 each, compared to the Lehle which starts at $200. Just put the two side by side and make a metal bar to attach to the two switches - then you have a single bar to activate both drive channels at the same time. I recommend using aluminum bar stock with holes drilled into it for the switches, or find a C channel aluminum bar that will put the footswitch buttons in the channel. You can also make it one inch overhang past both switch bodies and then use bolts to keep the bar in place. If I was doing this I would mount the footswitches on a board and secure the bar to be on top of the footswitches, using coil springs to maintain the bar's alignment vertically at the end bolts.
  • Fender Music | Answered on Jan 18, 2019 | 87 views


    Google (fender)(AX-12)(manual) without parens.

    Fender Music | Answered on Jan 12, 2019 | 94 views


    It should be possible. In any case, the reverb spring assembly can be removed carefully and unplugged (should have RCA plugs). When mounting the casters, make sure the fasteners don't conflict/block the reverb mountings.

    Fender Music | Answered on Nov 10, 2018 | 104 views


    Either on the head stock or on the neck, between the neck and body. Once you have the serial number, you will be able to find out where and roughly when it was made. The price is liable to be anything.

    Fender Music | Answered on Aug 04, 2018 | 102 views

    Not finding what you are looking for?
    Fender CD140sce Acoustic Electric Guitar Logo

    12 questions posted

    Ask a Question

    Usually answered in minutes!

    Top Fender Music Experts

    Michial Gueffroy

    Level 3 Expert

    1140 Answers

    rjivaro

    Level 2 Expert

    158 Answers

    Larry Stiles
    Larry Stiles

    Level 2 Expert

    301 Answers

    Are you a Fender Music Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...