20 Most Recent LG WFT1071TP Top Load Washer - Page 4 Questions & Answers

There is usually a small plastic tab that you push down to remove this lint filter. Push down then pull.

Place a piece of magnetic material at the edge of the lid, for the wf-s6697tc model.
Standing in front of the washer, it is slightly off centre to the right (at the edge where the lid covers, space between the wording speedy soak & fuzzy). If you pay attention to the lid, you might notice some brownish rust stain.
This is where they place the magnet.

kindly check whether power available or not with power point,,orther vice plug top pi use,,,

this machine is with water pump..becuse of that kindly hangup drain hose atlease inner tub level,,(2,1/2 feet)

There sure should be....why, because mine stopped working as well. Found magnet inside machine after getting rid of water on spin cycle (thankfully it still allows the water drain to occur). Put magnet back on and hey presto, all good.....if only I had taped it on as 5-6 washes later and it has fallen off and I can't find it - hopefully a standard magnet will be enough to fix from shops - I am sure LG or proper repair place sells them for a fortune :(

AS A CUSTOMER YOU CANT TAKE SERVICE MANUAL,,BUT YOU CAN TAKE ORNERS MANUAL ANY TIME,,,

ITS BELT DRIVER,WITH WASH MOTOR,,, ITS CONTROLLING BY DRAIN MOTOR,,BY THE DRAIN MOTOR CLUTCH FULLING & RELEASING,,,AT THAT TIME ONLY WASHING,,SPINNING,RINCEI TIME DRUM ROTATING ,,,