LG WD-1280FHD Front Load Washer - Page 9 - Answered Questions & Fixed issues


Possibly the circuit breaker failed and cannot be reset.

LG Washing... | Answered on Jun 23, 2019 | 1,018 views


Hello Johan,
This sounds like the pump has jammed up or the pump has failed. Remove pump and check wether there is anything jamming it up.
also if you put it on a spin cycle check if the pump is humming.
If Yes, there is your problem.
You will need to remove the pump to check that out.
Make sure it iturn freely.


https://www.manualslib.com/manual/645286/Lg-Wf-S1317t.html#product-WF-T1303TP

LG Washing... | Answered on Jun 22, 2019 | 980 views


Hello Reg,
Here is a couple of links that may help you in the repair. Good luck, JP
https://youtu.be/osTIeI7BIMI https://www.manualslib.com/manual/749659/Lg-Wt-H750.html#manual

LG Washing... | Answered on Jun 22, 2019 | 975 views


Hello Chris, Here is a link to the user manual. Hope it is helpful to you, best of luck. JP
https://www.manualslib.com/manual/646080/Lg-Wm2010c-Series.html#product-WM2355C

LG Washing... | Answered on Jun 22, 2019 | 985 views


Hello,
Here is something that has worked on some lg washers: unplug, wait five minutes, hold in power button for 15 secs, plug back in while holding in power button for another 15 secs, release. a supposed reset to control board.
I have also included a video link that may helpful to you.
Good luck,
JP
https://youtu.be/c2VypxOTExI

LG Washing... | Answered on Jun 21, 2019 | 117 views


Hello Tj Sunday,
The E6 error is telling you that the clutch is causing the error or fault. This fault can happen if a paperclip, nail, coin, or a foreign object is jammed in between the tub and pulsator. To clear the E6 error code on a top load LG washer: Take out all clothing or towels from the washer.
Good Luck,
JP
https://youtu.be/qa6_ViM3xug

LG Washing... | Answered on Jun 21, 2019 | 95 views


Hello Tj,
\The E6 error is telling you that the clutch is causing the error or fault. This fault can happen if a paperclip, nail, coin, or a foreign object is jammed in between the tub and pulsator. To clear the E6 error code on a top load LG washer: Take out all clothing or towels from the washer. https://youtu.be/qa6_ViM3xug

LG Washing... | Answered on Jun 21, 2019 | 93 views


If its flooding when the machine is off and water is still going into the machine, the inlet valves will be the fault. If its flooding when in use, there is a blockage or failure of the pressure switch or the pressure tube. These control the water level in the machine.

LG Washing... | Answered on Jun 16, 2019 | 103 views


This suggests a problem with the motor, the bearings or the suspension rods that hold the tub basket. In some cases, it could be caused by an object between the inner basket and the outer tub. The unit detects too much force on the motor or uneven forces as it spins and slows down even when empty. When there is a load, the washer stops to protect the system.

First try lifting up the inner basket and turning it a small amount. If this is difficult, one or more of the suspension rods and associated hardware should be checked and the damaged parts replaced. Check for and remove foreign objects between the basket and tub. Finally check the motor, motor shaft and bearings to determine which parts need to be replaced if the problem isn't corrected in the above steps.

I hope this helps.

Cindy Wells

LG Washing... | Answered on Jun 07, 2019 | 544 views


Probably something fallen out of clothing and catching on the drum.

LG Washing... | Answered on Jun 06, 2019 | 115 views


Check belt and belt tension switch.

LG Washing... | Answered on Jun 04, 2019 | 93 views


if it is still under warranty you may wanna check their online customer service representative for home service. If not under warranty then you can do DIY as long as you can follow the disassembly steps and as long as you know some basic electronics testing. Look for the pressure sensor switch. Let it check for its continuity through multimeter. This part can be removed on the machine if you dont know how to test then ask your nearest technician to do the testing.

LG Washing... | Answered on Jun 02, 2019 | 96 views


Hold button for 3 seconds

LG Washing... | Answered on May 29, 2019 | 92 views

Not finding what you are looking for?
LG WD-1280FHD Front Load Washer Logo

173 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...