20 Most Recent
HP Hewlett Packard LaserJet 3000dn Printer - Page 5 Questions & Answers
How do i fix an hp laserrjet pro m404 dn which keeps jamming in the cartridge area
There could be several reasons for this issue. One of the most common causes is a broken drive on the toner cartridge, especially if you are using third-party toners . You can try removing the cartridge and looking at the right and side to see if there is a small metal shaft with tabs on it. If it is broken, you will need to replace the toner cartridge .
If the issue persists, you can try the following steps:
Turn off the printer and unplug it from the power source.
Open the front door of the printer and remove the toner cartridge.
Check the cartridge area for any jammed paper or debris and remove it.
Reinstall the toner cartridge and close the front door.
Plug the printer back in and turn it on.
If the problem still persists, you may need to contact HP support for further assistance .
12/12/2023 12:53:35 AM •
HP Office...
•
Answered
on Dec 12, 2023
Why Does My HP Printer Keep Going Offline?
On encountering offline printer error, users often wonder why does my HP printer keep going offline. Well, there are various reasons why it happens. Some of the prominent causes for printer offline issues include jammed paper, faulty cable or connection, enabled offline mode, outdated firmware, and out-of-date drivers. To fix the HP printer offline error, first, check if there are ink cartridge or paper jam issues. If yes, resolve it quickly. Next, try using another cable to establish connections. Make sure to set your printer manually to online mode from the offline mode, update your firmware and HP printer driver.
11/20/2023 9:03:31 AM •
HP Office...
•
Answered
on Nov 20, 2023
Hp color laserjet pro mfp m283fdw paper jam in tray 2 can't see paper
Here are some steps you can try to resolve the issue:
Clear the jammed paper: Open tray 2 and remove any jammed paper. Open the rear door and look for and clear any paper present or obstructions in the paper path. Open rear cover. Clear Jam. Close the rear door to allow the printer to attempt to clear the jam message.
Check the fuser unit: If clearing the jammed paper doesn't resolve the issue, it's possible that the paper is stuck in the fuser unit or that the fuser exit sensor is broken. In this case, you will need to remove covers, flat bed scanner, and fuser to check for any obstructions .
https://www.youtube.com/watch?v=Lz9cTnbuDbw
https://www.youtube.com/watch?v=MxVyWqGeBgQ
If these steps don't help, I recommend contacting HP support for further assistance.
10/28/2023 9:14:46 AM •
HP Office...
•
Answered
on Oct 28, 2023
Not finding what you are looking for?