20 Most Recent Panasonic DMC-FX37 Digital Camera - Page 8 Questions & Answers

You need to go to the Panasonic support site and look.

Try posting this statement in a forum dealing with home entertainment equipment - this one is for cameras.

change the cable orderonline dont repair it

Resetting by 'Software' Resetting to the Factory Default Settings from the interface:

1. Go to the interface of your camera by typing in the camera's IP address in the browser. Example: http://192.168.1.253/
2. Click Setup, Maintenance, Default Reset, Reset to default and then click Execute.

Resetting by 'Hardware' Resetting to the Factory Default Settings using the Control button:

1. Disconnect the 'DC IN' cable from the camera.
2. Hold down the 'Initial Set' button.
3. Reconnect the power adapter using the 'DC IN' jack while holding down the 'Initial Set' button. Release the 'Initial Set' button after 5 seconds. (The reset could take up to 180 seconds)
4. When the 'Status' indicator changes to green, the process is completed and the camera had a Factory Default Reset.

http://electronicshelponline.blogspot.com/

There should be a menu option, explained in the manual, for this.

Backup the images from the cards, then format them in the camera.

Look in the manual.

No - you can probably replace it cheaper.

waterproof to 30 feet only,you went deeper and salt water got in,call the company,https://www.dpreview.com/products/panasonic/compacts/panasonic_dmcts2

Is there room for additional memory? If so add some

Check your menus for a language area and if there make the appropriate correction.